Votes - 2, Average rating: 5
(
)
)
|
manual abstract
• The unit selects the tape speed, SP, LP or SLP (EP). • The power is turned on and playback is started when dPLAY is pressed during power off. • Without high quality resolution on the picture, it is available to use S-VHS cassette tape on this unit. The picture may have noise with some tapes. If you cannot get a clear playback picture Although the unit adjusts the tracking automatically, you may need to adjust the tracking manually if the tape quality is too poor. If the picture and the sound have noise, try manual tracking. To adjust the tracking manually During playback, press SET/TRACKING + or – repeatedly until you get the best possible picture. (Automatic Tracking is canceled and “MANUAL TR.” and tracking bar appear.) To return to automatic tracking Press ATR. “AUTO TR.” appears. Additional functions To Press To return to the original mode Make a picture aPAUSE/STILL Press aPAUSE/ still during playback STILL or dPLAY. The DPLAY button falshes. Fast-forward the gF FWD/] Press sSTOP on tape during stop the remote control or ZSTOP/ EJECT on the unit. Rewind the tape fREW/[ Press sSTOP on during stop the remote control or ZSTOP/ EJECT on the unit. Eject the zEJECT on the — cassette remote control or ZSTOP/EJECT on the unit during stop Search forward gF FWD/] Press dPLAY. at low speed once during playback The DPLAY button falshes rapidly. Search forward gF FWD/] Press dPLAY. at a higher twice during playback The DPLAY button speed falshes rapidly. Search reverse fREW/[ Press dPLAY. at low speed once during playback The DPLAY button falshes rapidly. Search reverse fREW/[ Press dPLAY. at a higher twice during playback The DPLAY button speed falshes rapidly. Play at slow SLOW Press dPLAY. speed The DPLAY button falshes slowly. To watch a picture of the tape during fast- forward or rewind — Skip Search Press and hold gF FWD/]or fREW/[during fast- forward or rewind. The unit switches forward or reverse search and “D” of the button on the unit flashes. Release the button to return to the fast-forward or rewind mode. To skip an advertisement Press AD-SKIP during playback. The VCR searches forward approximately 30 seconds of the recorded time. Each press changes the recorded time of forward search in 30 seconds increments to a maximum of 3 minutes. After forward search, VCR returns to the normal playback. During AD-SKIP, the counter does not register blank portions with no recorded signal and “D” of the button on the unit flashes. To monitor a TV program Press TV MONITOR during playback. The cassette continues to play while the picture switches to TV channel. Press TV MONITOR again to return to playback picture. Tips • Even if you press zEJECT on the remote control or Z STOP/EJECT on the unit while the power is off, the unit ejects the cassette. • Depending on the tape, noise lines may appear or color may fade during forward and reverse searches, and still. You can move the noise lines during forward and reverse searches by pressing the SET/TRACKING + or – button repeatedly. Notes • If a still picture lasts for more than 5 minutes, the unit will automatically enter playback mode to protect the tape. • The sound will be muted during forward and reverse searches, and still. You can switch the speed of forward and reverse searches by pressing gF FWD/]and fREW/[repeatedly. ENGLISH 20 Playing back a tape repeatedly Playing back a tape repeatedly Various search functions TV VCR/CATV TV VCR/CATV POWER Number buttons (1-9) INDEX CALL ZERO T-REC RESET RETURN ZEROdPLAY RETURN wREC/OTR fREW/[ gF FWD/] ENTER MENU REC. END sSTOP SEARCH SET/TRACKING +/– Before starting Set the TV VCR/CATV selector to TV VCR. 1 Press MENU. 2 Press SET/TRACKING + or – to select AUTO REPEAT. 3 Press ENTER to select ON. 4 Press MENU to return to the normal screen. 5 Press dPLAY. The unit plays back the tape to the end, rewinds to the beginning, then repeats playback. To cancel repeat playback Press ENTER to select OFF in step 3. Repeat playback will also be canceled by pressing POWER, T-REC or wREC/ OTR, using the Zero Return function or ejecting the cassette. Rewinding or fast-forwarding to a specific point – Zero Return 1 Press CALL to display the tape counter. 2 Press RESET at the point you want to locate later. The tape counter resets to “00:00:00.” 3 After playback or recording, press sSTOP on the remote control or s/zSTOP/EJECT on the unit, then press ZERO-RETURN. The tape automatically stops when the tape counter returns to about “00:00:00.” Notes • When you insert a cassette, the tape counter is reset to “00:00:00.” • The tape counter does not work while playing unrecorded portions of tape. 21 ENGLISH Searching with the index function — Index Search Searching with the index function — Index Search The unit automatically marks an index signal on the tape each time recording starts. You can use these signals to find the beginning of any recording. Before starting Set the TV VCR/CATV selector to TV VCR. 1 Press INDEX during stop or playback. 2...
Other models in this manual:Cameras - VX-S137U (1.77 mb)