Votes - 2, Average rating: 4 ( )

Manafacture: Balance File size: 1.86 mb File name: Language of manual:

1. To clean the scale, wipe the outside of the scale with a soft cloth and mild detergent. Do not use abrasive cleaners. Never place the scale in water or spray with liquid. 2. This scale contains electronic parts. Use it carefully. Do not drop, kick or jump on it. 3. Do not store scale near chemicals, heaters or radiators. 4. Do not store scale on its side. 5. This scale is an extremely sensitive weight device. Items such as clothing or towels placed or dropped on the scale may cause it to activate. In order to prevent run down of the battery, do not place anything on the scale. 1. BUTTONS 1.1 ON/OFF: for tuning-on and turning-off 1.2 ZERO: for tare function 1.3 HOLD/RELEASE: for locking in and releasing the weight 1.4 KG/LB: for changing the unit 1.5 UP: for increasing height input (0.5cm/time) 1.6 DOWN: for decreasing height input (0.5cm/time) 1.7 BMI: for height input before BMI calculation 1.8 CLEAR: for clearing incorrect height input 1.9 ENTER: for confirming the input 2. TO START THE SCALE FOR WEIGHT MEASUREMENT StArt 0.0 ZEROKG49.7KGLOCK 2.1 Turn on the scale by pressing the button ON/OFF.”START” appears on the LCD. 4-5 seconds later,”0.0” shows. 2.2 Measure the weight of the user after he/she steps on the scale. After the weight has stabilized, the stable weight icon and the weight will be displayed. 2.3 The stable weight will be displayed until the user steps off the scale. Then “0.0” shows. 3. BMI CALCULATION 150.0CMLOCKHEIGHT 3.1 After the operation of 2.1 and 2.2, the stable weight icon and the stable weight will be displayed. Then press the button “BMI”, and a number for height shows. 3.2 Choose a right height or a nearest one by pressing the button “UP” or “DOWN”. 22.1BMILOCK 3.3 Then confirm your input by pressing “ENTER” and your BMI displays. The LCD will return to weight display if the button “CLEAR” is pressing. 4. HOLD FUNCTION HOLDKGLOCK 4.1 After the stable weight icon and the stable weight show, press the button “HOLD/RELEASE” to activate hold function. Then the stable weight will be held, until this function is cancelled. 4.2 After the hold function is activated, the user can cancel this function by pressing “HOLD/RELEASE”. 5. AUTO OFF FUNCTION -If the user does not press any buttons within 2 minutes, the scale will automatically turn off. (Note: If it is powered by the adapter, Auto off function is invalid) 6. WARNINGS AND PRECAUTIONS 49.7KGLOCK 6.1 Low battery feature. A low battery indicator flashes when the battery is low. 3 4 6.2 Overload indication. When the scale is overloaded, “OVER” will shows. 6.3 Negative weight. When there is a negative weight value, “UNDER” shows and the scale will correct this error by rezero-setting. 7. POWER SOURCE 7.1 6*AA batteries or a 12V adapter. When the adapter is used, the battery icon will not be displayed 8. CALIBRATION 1. Press UP and Down at the same time, then press ON/OFF to start the scale. LCD will displays ”CAL”, then returns to “0.0 LB” 2. Press DOWN key, it displays”-100”, then put on 100lb weight. After display data becomes stable, Press DOWN key, it displays “CAL” then ”-200”, 3. Put on 200lb weight. After display data becomes stable, press DOWN key, it displays “CAL” then ”-300”. 4. Put on 300lb weight. After display data becomes stable, press DOWN key,it displays "CAL" then "-400". 5. Put on 400lb weight. After display data becomes stable, press DOWN key, it displays "CAL" then "-500" 6. Put on 500lb weight. After display data becomes stable, press DOWN key, it displays "CAL" then auto off automatically. 1. Connect Lower Pillar (B) to Base (C) using 4 Screws (D). 2. Connect Upper Pillar (A) to Lower Pillar (B). 3. Connect Upper Height Rod (E) to Lower Height Rod (F). 4. Place assembled height rod into slot (H) as shown. Pinch stops (G) to allow entry. OPERATING INSTRUCTIONS MODEL 500KL OVErOVERLOAD UndEr 0.0 ZERO KG ASSEMBLY INSTRUCTIONS C A E F G H B C D BALANCES.COM BALANCES.COM LIMITED WARRANTY What does the Warranty Cover? Pelstar LLC scales are warranted from date of purchase against defects of materials or in workmanship for a period of one (1) year. If product fails to function properly, return the product, freight prepaid and properly packed to Pelstar. See “To Get Warranty Service” below for instructions. If manufacturer determines that a defect of material or in workmanship exists, customers' sole remedy will be repair or replacement of scale at no charge. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. All parts including repaired and replaced parts are covered only for the original warranty period. Who is Covered? The original purchaser of the product must have proof of purchase to receive warranty service. Pelstar dealers or retail stores selling Pelstar products do not have the right to alter, or modify or any way change the terms and conditions of this warranty. What is Exc...

Download now

Please, enter two numbers from picture: