(In the 4-speed version the pushbutton + blinks. The fourth speed remains on for a set duration of time. After 15 minutes the motor returns to the third speed). Mode pushbutton Function: it turns hood motor on and off. The function “desired speed” enables to start the motor at the speed that was selected before the hood was last turned off. Optional: version with remote control (some versions only). WARNING: Install the hood away from sources of electromagnetic waves, as these could affect the c
For best results, we suggest that you carefully follow the operating and maintenance instructions provided in this booklet; in addition, to order spare charcoal filters, use the special coupon on the cover. Chere Madame/Cher Monsieur, felicitations! Vous venez d’acheter une hotte haut de gamme. Pour en tirer les performances les meilleures veuillez lire avec attention le mode d’emploi et la maintenance que vous trouvez dans ce manuel ; pour commander les filtres de rechange au carbone actif veui
In addition, exhaust air must not be discharged into a wall cavity unless designed for the purpose. Note instructions for cleaning fan as note «4» on «MAINTENANCE». Moreover it is important to clean regularly each filter of the hood or replace it. N.B. THE RANGEHOOD IS DESIGNED FOR INDOOR USE ONLY. UNDER NO CIRCUMSTANCES SHOULD THIS UNIT BE INSTALLED IN OUTDOOR CONDITION OR OVER A BARBECUE. 1)READ AND SAVE THESE INSTRUCTIONS 2)WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: A. Never lea
-The evacuated air must not be let into a warm air ducl. -This appliance must be connected to a system equipped with earth or ground plate. -When performing maintenance operations, disconnect the appliance from the field connection. - Do not do any flambe cooking underneath the hood. - When frying, never leave the pan alone because the cooking oil could flare up. - Clean ali the surfaces frequently to avoid danger of Fire. To do so use a cloth and or brush soaked in denatured ethyl alcohol. It i
3) Insert the 2 nuts in the holes on the lower part of the long pipe. Put the long pipe over the short one (Pict.4/E) by pulling a part the laterals of the pipe. 4) Fix the long pipe wilh 2 serews on the hood (Pict. 4/Q). Attention: The panel should be fitted over the body after installation and fixed using the special screws, (Pict. 5). Electrlc connectlon Attention:The appliance is provided with a supply cord and plug, the appliances must be positioned so that the plug is accessible. Attention