|
manual abstract
High (II)b. When finished using the fan, turn the 5. Rocker Switch to Off (O), unplug the unit and store in a safe, dry location. CAUTION: Should the Fan not start when the unit is plugged in and turned on, or if the motor “hums” but the fan does not rotate, immediately turn off and unplug the fan and have it serviced by a qualified technician. INSPECTION AND MAINTENANCE To prevent serious injury from accidental operation or electric shock: Before appliance inspection or maintenance, make sure the appliance’s switch is turned off, the cord is unplugged, and the unit has cooled completely. To prevent serious injury from Appliance failure: Do not use damaged appliances. If abnormal noise or vibration occurs, have the problem corrected before further use. BEFORE EACH USE,1. inspect the condition of the Fan. Check for loose screws, misalignment or binding of moving parts, the condition of the electric wire and its plug, and any other condition that may affect its safe operation. To facilitate flow of air, clean the fan 2. blade and grills regularly. To do so: Turn off and unplug the fan. Remove a. the five screws from the back of the grill and gently pry the grills apart. Wash the front grill in mild detergent b. and warm water, then wipe dry with a clean cloth. Wipe dirt from the blades, rear grill and c. electrical cord. Re-assemble in reverse order. Allow to d. dry completely before reconnecting to power source. When not in use, store in a safe, dry 3. location, out of reach of children. This item is pre-lubricated at the factory. 4. No additional lubrication is required. ...
Other models in this manual:Fans - 67594 (598.96 kb)
Fans - 67594 (598.96 kb)
Fans - 67594 (598.96 kb)