Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
This work must be done only by a qualified electrician, using copper wire only. WARNING: USE OF A THREE-PRONG TO TWO-PRONG ADAPTER IS NOT RECOMMENDED. IMPROPER CONNECTION MAY CREATE THE RISK OF ELECTROCUTION. USE OF SUCH ADAPTERS IS NOT PERMITTED IN CANADA. WARNING: This plug is a safety feature. To reduce the risk of fire, electric shock and personal injury, do not remove, replace, repair or tamper with the originally supplied plug. If the Fan does not function properly, it may be due to the safety device incorporated in this plug. CONTACT YOUR GRAINGER DISTRIBUTOR. 8. Where possible, avoid the use of extension cords. If they must be used, minimize the risk of overheating by ensuring that they are UL listed. Never use a single extension cord to operate more than one Fan. 9. Do not operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner. Return Fan to authorized service facility for examination, electrical or mechanical adjustment or repair. 10. Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the Fan. Do not block or tamper with the Fan in any manner while it is in operation. 11.Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power Cord so the Fan or other objects are not resting on it. Do not run Power Cord under carpeting. Do not cover Power Cord with throw rugs, runners, or the like. Arrange Power Cord away from room traffic and where it will not be tripped over. 12.This Fan is not intended for use in wet or damp locations. Never locate a Fan where it may fall into a bathtub or other water container. 13. Do not use Fan outdoors. 14.This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for Agricultural Buildings. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008). 15. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008). WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICES. 7 LISTE DES PIECES DE REMPLACEMENT No No de ref de piece Description Qte. 1 2091119 Vis #6 x 0,9 cm PPH type AB ZP 12 2 2018001 Grille arriere 1 3 2011405 Poignee 1 4 2011402 Bouton 1 5 2061713 Chassis du ventilateur 1 6 02050031WFPB Cordon d'alimentation uniquement 1 7 02031246S Moteur avec interrupteur 1 8 2011278 Lame 1 9 2018000A Grille avant 1 10 2091211 Vis #10 x 1,3 cm PPH Type A 4 11 2091118 Vis #6 x 0,9 cm PPH Type AB Grn 1 1 OPERATION 1. Brancher le ventilateur dans une prise de courant standard a 120 Vca. 2. Regler la vitesse desiree a l'aide de l'interrupteur rotatif. MAINTENANCE AVERTISSEMENT: TOUJOURS DEBRANCHER LE CORDON D'ALIMENTATION AVANT D'EFFECTUER UN SERVICE. NETTOYAGE: Utiliser un chiffon doux et une solution a base de detergent doux com...