Votes - 2, Average rating: 4.5 ( )

Manafacture: Frigidaire File size: 1.6 mb File name: Language of manual:

• If the fan is at second speed and the “ ” General ON/OFF Push button Switch Back side of the hood Frontside of the hood Control buttons - Special functions Special functions Clock pr Clock prClock prClock prClock prClock programming ogrammingogrammingogrammingogrammingogramming • The clock can be reprogrammed at any time except during an active timed function. • The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59. • The clock can be reprogrammed pressing the “T TTTTTimer imerimerimerimerimer” button for 5 seconds, and after, the clock can be adjusted with the “ ” and “ ” buttons. Colon “:” will flash indicating clock programming mode. • The user can have minute increments / decrements of 1 minute, but if the user keep pressing the “ ”/ ” ” buttons for more than 1 second, the increments / decrements will be of 5 minutes. During this option the control will round to the nearest 5 minutes. • The user can finish on reprogramming the clock pressing the “T TTTTTimer imerimerimerimerimer” button. • After 1 minute of no button pressed the control will accept the programmed clock time and will add one minute to the set clock. Gr GrGrGrGrGrease filter saturation alarm ease filter saturation alarmease filter saturation alarmease filter saturation alarmease filter saturation alarmease filter saturation alarm • After thirty fan functional hours, the display will show “Gr GrGrGrGrGrease Filter ease Filterease Filterease Filterease Filterease Filter” if the fan is active. When this icon is shown in the display, the grease filters installed are required to be washed. • To reset the grease filter saturation alarm the user must press the “ ” button for 5 seconds, after this action the icon “Gr GrGrGrGrGrease filter ease filterease filterease filterease filter ease filter” is not displayed, and the hood has the normal display operation. Char CharCharCharCharCharcoal filter saturation alarm (Recir coal filter saturation alarm (Recircoal filter saturation alarm (Recircoal filter saturation alarm (Recircoal filter saturation alarm (Recircoal filter saturation alarm (Recirculating accessories) culating accessories)culating accessories)culating accessories)culating accessories)culating accessories) • After one hundred and twenty functional hours of the fan, the display will show “Char CharCharCharCharCharcoal Filter coal Filtercoal Filtercoal Filtercoal Filtercoal Filter” if the fan is active. When this icon flashes on display, the charcoal filters installed are required to be replaced or reactivated. • To reset the charcoal filter saturation indication the user must press the “ ” button for 5 seconds, after this time the icon “Char CharCharCharCharCharcoal filter coal filtercoal filtercoal filtercoal filter coal filter” is not displayed and the hood has the normal display operation. Audible signal activation and deactivation Audible signal activation and deactivationAudible signal activation and deactivationAudible signal activation and deactivationAudible signal activation and deactivationAudible signal activation and deactivation • The audible signals can be activated or deactivated pressing the “Light LightLightLightLightLight” button for 5 seconds. • If the audible signal is activated, a tone must sound and the “Snd SndSndSndSndSnd” symbol must appear on the display for 2 seconds. • If the audible signal is deactivated, the “Snd SndSndSndSndSnd” symbol must appear on the display for 2 seconds and no tone must sound. Char CharCharCharCharCharcoal filter inclusion and exclusion (Recir coal filter inclusion and exclusion (Recircoal filter inclusion and exclusion (Recircoal filter inclusion and exclusion (Recircoal filter inclusion and exclusion (Recircoal filter inclusion and exclusion (Recirculating accessories) culating accessories)culating accessories)culating accessories)culating accessories)culating accessories) • The charcoal filter inclusion or exclusion can be set by pressing the “ ” and “ ” buttons at the same time for 5 seconds. • The Inclusion or exclusion of charcoal filter must be selected while the lamps and the motor are OFF. • When the charcoal filter has been excluded, the charcoal filter alarm is disabled. Heat sensor Heat sensorHeat sensorHeat sensorHeat sensorHeat sensor • The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat occurs (over 158° F 158° F158° F158° F158° F158° F or 70°C 70°C70°C70°C70°C70°C) surrounding the control area. • If the blower is OFF or if it is operating at first speed, the blower will be set automatically to second speed, the display shows the word "CArE CArECArECArECArECArE" to indicate that heat sensor has detected an excessive heat. • During this state, the user may raise the blower speed to third speed but can not decrease the speed. • When the temperature level on the hood drops to normal, the blower will operate in the setting defined by the user before the alarm occured. For Best ...

Download now

Please, enter two numbers from picture: