Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
It is acceptable to chase the threads if applicable and necessary. Do not face bottom bracket cups. THREADED: Ensure that the bottom bracket shell threads are clean and greased prior to installation. Recommended torque is 442 in-lbf (50 N-m). OVERSIZED BB: Please refer to the carbon crank installation guide for assembly instructions and compatible tools. WARNING! Failure to follow the torque specifications in this installation guide will void the warranty, but most importantly may result in damage to the frame which may not be visible. If the frame is damaged, this can result in loss of structural integrity, which may result in serious personal injury or death. Bicycle components such as a handlebar, handlebar stem, seat post, saddle, brakes, all must be compatible with each other, the frame and the intended use. Any doubt regarding compatibility should be discussed with your local authorized Specialized retailer. WARNING! When placing the frame and/or bicycle in a repair stand, clamp the stand to the seat post and not the frame. Clamping the frame can cause damage to the frame that may or may not be visible. INSTALLING THE SEAT POST & SADDLE COMPONENT TORQUE SETTINGS Refer to your seat post installation guide prior to installation. Specialized road frames have a 27.2mm seat post diameter and require that the seat post have a tolerance of 27.08mm to 27.25mm. The Tarmac SL2 frames use a seat post collar specifically designed for these frames. Use of a different collar can cause damage to the frame or seatpost, resulting in failure (see fig.1 for proper setup). Tighten seat collar bolt to recommended torque of 55 in-lbf (6.2 N-m). • Braze-on Front derailleur: Recommended torque is 44 in-lbf (5.0 N-m). • Rear derailleur: Recommended torque for the rear derailleur is 70 in-lbf (7.9 N-m). Ensure that threads are clean prior to installation. • Seat collar: Recommended torque is 55 in-lbf (6.2 N-m). • Water Bottle Cage: Recommended torque is 35 in-lbf (4.0 N-m). To avoid damage to the bottle cage frame rivets, ensure that the cage doesn’t flex around the front derailleur clamp. If the cage doesn’t clear the clamp, use longer bolts and spacers to help the cage clear the derailleur clamp. Turn collar slot 180°oppositefrom frame slotGrease bolt threadsCHAMFER SEAT TUBE EDGES•Full radius of top edge• Along full length of frame slotFrameSlot27.2mmFrameSlot• SEAT TUBE I.D. • SEAT POST O.D. GREASEFRAME SLOTGREASERecommended Torque: 55 in-lbf (6.2 N-m) Alloy shim Fig.1 WARNING! Great care should be taken not to damage composite materials, including the frame and any composite components. Any damage may result in a loss of structural integrity, which may result in a catastrophic failure. This damage may not be visible in inspection. Before each ride, and after any crash, carefully inspect the bicycle for and dents, fraying, gouging, scratches through the paint, chipping, bending or any other signs of damage. Do not ride if the bicycle shows any signs of these signs. After any crash, and before riding any further, take the bicycle to an authorized Specialized retailer for a complete inspection. WARNING! Do not grease the seat tube surface that contacts the ...
Other models in this manual:Bikes - TARMAC - PRO (129.03 kb)