ttFor cutouts below 22 7/8”, appliance will slightly show out of the cabinet. +Allow at least 20" clearance for door depth when it is open. Sears Contract Sales Because of our continuous program of product improvement, Sears reserves the right to change materials and specifications without notice. Consult installation instructions packed with the product for final dimensional data. For complete warranty information, contact your local Sears Contract Sales Account Manager. Listed by Underwr

Standard Burner: This burner can be used for most all surface cooking needs. Power Burner: This larger burner is best used when bringing large quantities of liquid to temperature and when preparing larger quantities of food. Regardless of size, always select a utensil that is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan. Each burner lights from an electric ignitor when

2.5 cm (1"). sides. Check for flatness by rotating a ruler across Tight fitting lids. the bottom of the Figure 1 Weight of handle does not tilt cookware (See Figure Heavy handle tilts pan. 1). Be sure to follow pan. Pan is well balanced. the recommendations for using cookware Pan sizes match the amount as shown in Figure 2. Flame extends beyond unit. Note: The size and type of cookware used of food to be prepared. will influence the setting needed for best Made of material that cooking results.

Burner Cap Burner Extra Large "POWER" Burner Head Left Rear (9,500 (12,200 BTU or )Gas Opening 14,200 BTU) Left Front Center Gas Opening Gas Opening _a nner & Outer Burner Caps I Burner Head (18,000 BTU) Right Front Gas OpeningS/ _, _, _. Right Front Gas Opening Dual Burner _ on Models 790.3248 "_790.3249 only Burner Skirt 36" Models only Burner Cap (Standard) Models only Burner Cap _Burner Head (5,000 BTU) Right Rear Gas Opening Burner Head (16,200 BTU) Right Front Opening Figure 1 Burner G rat

The graphics shown are representative. The graphics on your appliance may not look exactly like those shown. Common sense and caution must be practiced when installing, operating and maintaining any appliance. Product Record In this space below, record the date of purchase, model and serial number of your product. You will find the model and serial number printed on the serial plate. This serial plate is located under the cooktop. See bottom of this page for the serial plate location. Model No.

Burner Cap Burner Extra Large "POWER" Burner Head Left Rear (9,500 (12,200 BTU or )Gas Opening 14,200 BTU) Left Front Center Gas Opening Gas Opening _a nner & Outer Burner Caps I Burner Head (18,000 BTU) Right Front Gas OpeningS/ _, _, _. Right Front Gas Opening Dual Burner _ on Models 790.3248 "_790.3249 only Burner Skirt 36" Models only Burner Cap (Standard) Models only Burner Cap _Burner Head (5,000 BTU) Right Rear Gas Opening Burner Head (16,200 BTU) Right Front Opening Figure 1 Burner G rat

• Preheat your oven to 350°R Place the griddle on the upper rack in your oven. • Bake griddle for 1 hour at 350°F, then turn oven OFF and let cool before removing. • The surface may appear to have a tacky feel to it from this seasoning process. If desired, wash the griddle in hot soapy water, rinse well, and dry completely. After each use: • To prevent rusting, store in a dry place and keep uncovered. • After each use, clean with a stiff brush and hot water only. • DO NOT CLEAN GRIDDLE iN DISHWA

Destroy the carton and plastic bags after not be stored on the cooktop, near surface burners. unpacking the cooktop. Never allow children to play This includes paper, plastic and cloth items, such as with packaging material. Do not remove the model/serial cookbooks, plasticware and towels, as well as plate attached to the cooktop. flammable liquids. Do not store explosives, such as aerosol cans, on the cooktop. Flammable materials may • Proper Installation--Be sure your appliance is explode and

Never allow children to mable liquids. Do not store explosives, such as aeroplay with packaging material. Do not remove the model/ sol cans, on the cooktop. Flammable materials may serial plate attached to the cooktop. explode and result in fire or property damage. * Proper Installation--Be sure your appliance is prop= Do not store items of interest to chilerly installed and grounded by a qualified technician dren in the cabinets above the cooktop. in accordance with the National Fuel Gas Code A

4. When cooking has completed, turn the surface control knob to OFF before removing the cookware. Note: The HE message will appear inthe display after turning the Figure 3 control knob to OFF if the cooktop is still hot and remain on until the heating surface area has cooled sufficiently. The message may remain on even though the controls are turned OFF. Note: See Table on previous page for recommended control settings. Radiant surface elements may appear to be cooled after they have been turned