Votes - 3, Average rating: 3.7 ( )

Manafacture: Bosch File size: 1 mb File name: 935931EN.pdf Language of manual:

WARNING! Risk of injury from electrical current. The combination appliance is live. • Observe electrical safety rules. • Rated voltage of the combined appliances must match. • Fit plug and socket connections together properly. • Install correctly to give anti-shock protection. • Loose and incorrect plug and socket connections can make the terminal become too hot. • A qualified electrician must install the clamping connections correctly. The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm. You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. Assembly min. 50mm min. 500mm 600mm 490+1 mm 750+1mm= = R 5mm Installation 5 min. 28 mm Removal 3 4 5 6 3 4 5 6 6 Description of the appliance DESCRIPTION OF THE APPLIANCE Cooking surface layout 1 2 4 356 145 mm 120/180 mm 145/210/270 mm 170 mm 265 mm 1 Single cooking zone 1200 W 2 Triple cooking zone 1050/1950/2700 W Multi-purpose zone 1400/2200 W Control panel Double cooking zone 700/1700 W Steam outlet Description of the appliance 7 Control panel layout 1 2 4 3 5 679 8 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate. sensor field function 1 selects the cooking zone increases or decreases the time / the timer display shows the time in minutes 2 3 4 starts and stops the outer rings starts and stops the key lock or child lock starts and stops the oval zone a heat setting display shows the heat setting 5 6 7 starts and stops STOP+GO starts and stops the outer ring 89 Heat setting displays Display The cooking zone is off The cooking zone operates - Description Keep Warm The automatic heat-up function is on There is a malfunction + digit Residual heat indicator: still cooking / keep warm / residual heat / / Lock/Child safety function is on The automatic switch off is on 8 8 Operating the appliance OptiHeat Control (3 step Residual heat indicator) WARNING! / / Risk of burns from residual heat! OptiHeat Control indicates the level of the residual heat. OPERATING THE APPLIANCE You operate the hob with the knobs of the appliance that you installed with the hob. The Operating Instructions chapter for this appliance tells how to operate the hob. When a cooking zone operates, it hums for a short time. This is typical of all ceramic glass cooking zones and does not show that the appliance operates incorrectly. Automatic Switch Off The function stops the hob automatically if: • all cooking zones are off . • you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds. The sound operates some time and the hob stops. Remove the object or clean the control panel. • you do not stop a cooking zone or change the heat setting. After some time comes on and the hob stops. See the table. Automatic Switch Off times Heat setting , - - - 1.5 hours Stops after 6 hours 5 hours 4 hours / Switching the outer rings on and off You can match the effective heating surface to the size of the cookware. To switch on the outer ring touch the sensor field / . The indicator comes on. For more outer rings touch the same sensor field again. The next indicator comes on. Do the procedure again to switch off the outer ring. The indicator goes out. The automatic heat up Automatic heat up function sets the highest heat setting for some time, and then decreases to the necessary level. To switch it on turn the cooking zone knob to the right until you see in the display. After that set the heat setting immediately. Operating the appliance 9 122.33.44.55.66.780 1 2 3 4 5 6 7 8 9 10 11 Using the Timer Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session. Set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. • Selection of the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. • Starting the Count Down Timer: touch of the timer to set the time ( 00 -99 minutes). When the indicator of the cooking zone flashes slower, the time counts down. • Checking the remaining time: select the cooking zone with . The indicator of the cookin...

Download now

Please, enter two numbers from picture: