Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 3.54 mb File name: Language of manual:

The movement of some pans may leave metal residue on the pan supports. Clean the burners and pan supports using soapy water and scrub with a non-wire brush. If the pan supports are fitted with rubber rests, ensure that these are also cleaned. The rests may come loose and the pan support may scratch the hob. Always dry the burners and pan supports completely. Water droplets or damp patches on the hob at the start of cooking may damage the enamel. After cleaning and drying the burners, make sure the burner caps are correctly positioned on the diffuser. Caution! ¦ Do not use steam cleaners. This could damage the hob. ¦ If your hob is fitted with a glass or aluminium panel, never use a knife, scraper or similar implement to clean the point where it joins the metal. Maintenance Always clean off any liquid as soon as it is spilt. This will prevent food remains from sticking to the hob surface and you will save yourself any unnecessary effort. Due to the high temperatures endured, the wok burner and the stainless steel zones (grease drip tray, burner outline, etc.) can change colour. This is normal. After each use, clean these areas with a product that is suitable for stainless steel. It is recommended that the cleaning product available from our Technical Assistance Service (code 464524) is used regularly. Caution! The stainless steel cleaner must not be used in the area around the controls. The (printed) symbols may be wiped off. Do not leave acidic liquids (e.g. lemon juice, vinegar, etc.) on the hob. Trouble shooting Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice: Fault Possible cause Solution The general electrical sys-Defective fuse. Check the fuse in the main fuse box and change it tem is malfunctioning. if it is damaged. The automatic safety switch or circuit breaker has Check the main control panel to see if the auto- tripped. matic safety switch or circuit breaker has tripped. The automatic switching on There may be food or cleaning products stuck The space between the ignition sparker and the function does not work. between the ignition sparkers and the burners. burner must be clean. The burners are wet. Dry the burner caps carefully. The burner caps are not correctly positioned. Check that the covers are correctly positioned. The appliance is not earthed, is poorly connected Contact the installation technician. or the earthing is faulty. The burner flame is not uni-The burner components are not correctly positioned. Ensure the components are correctly positioned. form. The grooves on the burner are dirty. Clean the grooves on the burner. The gas flow is not normal The gas supply is blocked via intermediary valves. Open all gas taps. or there is no gas. If the gas is supplied from a gas cylinder, check Change the gas cylinder. that this is not empty. The kitchen smells of gas. A gas tap has been left on. Turn off the taps. Incorrect coupling of gas cylinder. Check that the coupling is sound. Possible gas leak. Shut off the gas supply, ventilate the premises and immediately notify an authorised installation technician so that they can check and certify the installation. Do not use the appliance until you are sure that there is no gas leak in the installation or appliance itself. Fault Possible cause Solution The safety valves on one of the burners are not working. The control knob was not held down for long enough. The grooves on the burner are dirty. Once the burner is on, hold the control knob down a few seconds longer. Clean the grooves on the burner. Technical Assistance Service When contacting our Technical Assistance Service, please provide the product number (E-Nr.) and production number (FD) of the appliance. This information is given on the specifications plate located on the lower section of the hob and on the label in the user manual. After-sales contact details for all countries can be found in the attached after-sales service directory. Warranty conditions In the unlikely event that the appliance is damaged or does not meet your expectations in terms of quality, please inform us as soon as possible. For the warranty to be valid, the appliance must not have been tampered with, or used inappropriately. The applicable warranty conditions are those set out by the company's representative office in the country of purchase. Detailed information is available from retail outlets. Proof of purchase must be presented to obtain the benefits of the warranty. We reserve the right to introduce changes. Used appliances and packaging If the )symbol is shown on the specifications plate, bear in mind the following instructions: Environmentally-friendly waste management Unpack the appliance and dispose of the packaging by environmentally-friendly means. The packaging of your appliance has been manufactured using only the materials which are strictly necessary to guarantee efficient protection during transport. These m...

Download now

Please, enter two numbers from picture: