Votes - 0, Average rating: 0
(
)
)
|
manual abstract
¦ as a timer. Turning off a hotplate automatically Enter the time period for the hotplate. The hotplate turns off automatically once the time has elapsed. How to program 1. Select the required hotplate and power level. 2. Press the 0 symbol several times until the required hotplate is selected. The ‹‹ indicator lights up in the time program function display. The x indicator lights up on the hotplate. 3. Press the + or - symbol on the time program function. The basic settings are displayed. Symbol + 30 minutes Symbol - 10 minutes 4. Set the required time using the + or - symbol. After a few seconds, the timer will start to count down. The last programmed cooking time will appear in the display. Once the time has elapsed The cooking zone switches off once this time has elapsed. A warning beep sounds. ‹ appears on the hotplate and ‹‹ appears on the time program function display. Pressing the 0 symbol turns off the indicators and stops the beep. Turn the control to the 0 setting. Correct or cancel the time Press the symbol 0 several times until the x indicator for the required hotplate lights up with greater intensity. Change the cooking time or set to ‹ with the symbols + or - . Note. Any cooking time can be programmed up to 99 minutes. Automatic timer With this function you may select a cooking time for all hotplates. Once a hotplate is switched on, the selected time will begin to count down. The hotplate will automatically switch off when the cooking time has elapsed. Instructions on activating the timer are found in the chapter entitled " Basic settings" . Note: The cooking time of a zone may be cancelled or changed: Press the 0 symbol several times until the required x indicator lights up. Change the cooking time using the + or symbols, or set to ‹‹ . The timer The timer can be set for periods of up to 99 minutes. It is independent of the other settings. This function does not automatically switch off a hotplate. How to program 1. Press the 0 symbol several times until the W indicator lights up. ‹‹ appears in the time program function display. 2. Press the + or - symbol on the time program function. The basic setting will appear. + symbol: 10 minutes. - symbol: 05 minutes. 3. Set the time required using the + or - symbols. After a few seconds, the timer will start to count down. Once the time has elapsed A warning beep sounds. In the time program function display ‹‹ is shown, and the W indicator comes on. After 10 seconds the indicators turn off. Pressing the 0 symbol turns off the indicators and stops the beep. Changing or cancelling the time Press the 0 symbol several times until the W indicator lights up. Change the cooking time or set to ‹‹ with the symbols + or - , Automatic time limitation If the hotplate remains in use for a long time and no changes When the control is turned to setting 0, the indicator goes off. are made in the settings, the automatic time limitation function The hotplate can now be reset. is triggered. When the automatic time function is used, it is governed by the The hotplate stops heating. The ” , ‰ symbol and the residual selected power level ( from 1 to 10 hours) . heat indicator • / oe flash alternatively in the display. Basic settings The device has several basic settings. These settings may be adapted to the user's individual needs. Indicator Function ™ ‚ Childproof lock ‹ Off. * ‚ Activated. ™ . Sound signals ‹ Most signals off. ‚ Some signals off. . All signals activated. * ™ † Automatic timer ‹ Switched off. * ‚ - SS Automatic shut-off time ™ ‡ Duration of the time program function warning signal ‚ 10 seconds. * . 30 seconds. „ 1 minute. ™ ‹ Return to basic settings ‹ Personal settings.* ‚ Return to factory settings. *Factory settings Accessing the basic settings 4. The select the required setting with the boost G symbol of the lower left and lower right hotplates. The hob should be switched off. 1. Switch on the front left- hand side hotplate ‘ to power level 1. 2. Within 10 seconds, press the @ symbol for 4 seconds. ™‚ is displayed on the left of the screen and ‹ on the right. 3. Press the @ symbol until the indicator for the required function is displayed. The new setting appears in the time function program display. 5. Press the @ symbol for 4 seconds. The settings will have been properly saved. Exit the basic settings without changing them Switch off the hob and reset it. Care and cleaning The advice and warnings contained in this section aim to guide you in cleaning and maintaining the hob, so that it is kept in the best possible condition Hob Cleaning Clean the hob after each use. This prevents food remains left on the surface from burning. Wait until the hob is cold enough before attempting to clean it. Only use cleaning products specifically designed for glass- ceramic hobs. Follow the instructions provided on the packaging. Do not use: ¦ Abrasive products ¦ heavy-duty cleaners, like oven sprays and stain removers ¦ Pads that may scratch ¦ High-pressure or ste...
Other models in this manual:Cooktops - NIB675T14E/02 (614.12 kb)
Cooktops - NIB801T14E/03 (614.12 kb)
Cooktops - NIB875T14E/03 (614.12 kb)
Cooktops - NIC875T14E/01 (614.12 kb)