Votes - 3, Average rating: 3.3 ( )

Manafacture: Hotpoint-Ariston File size: 1.14 mb File name: Language of manual:

- 2009/142/EEC dated 30/11/09 (Gas) and subsequent amendments. - 2002/96/EC and subsequent amendments. 4 Burner and nozzle specifications GB Table 1 Liquid Gas Natural Gas Burner Diameter (mm) Therma kW (p Nom. l Power .c.s.*) Red. By-p 1/1 (m ass 00 m) (1) Nozzle 1/100 (mm) Flo g w* /h Nozzle 1/100 (mm) Flow* l/h Nozzle 1/100 (mm) Flow* l/h Fast (Large) (R) 100 3.00 0.70 41 39 86 218 214 116 286 143 286 Reduce Fast (RR) 100 2.60 0.70 41 39 80 189 186 110 248 135 248 Semi Fast (Medium) (S) 75 1.65 0.40 30 28 64 120 118 96 157 105 157 Auxiliary (Small) (A) 55 1.00 0.40 30 28 50 73 71 71 95 80 95 Triple Crown (TC) 130 3.25 1.50 60 61 91 236 232 133 309 150 303 Supply pressures Nominal (mbar) Minimum (mbar) Maximum (mbar) 28-30 20 35 37 25 45 20 17 25 13 6,5 18 * At 15°C and 1013 mbar-dry gas ** Propane P.C.S. = 50.37 MJ/kg. *** Butane P.C.S. = 49.47 MJ/kg. Natural P.C.S. = 37.78 MJ/m3 (1) Only for appliances with the security device. CISPH 640.../HA 7HPH 640... /HA 7HPH 640S... /HA CISPH 640MST.../HA 7HPH 640ST... /HA 7HPHR 640ST... /HA 7HPH 631 MS IX RU/HA 7HPH 631 MS RU/HA 5 Description of the appliance Overall view ELECTRIC HOTPLATE * Support Grid for COOKWARE GAS BURNERS Control Knobs for GAS BURNERS and ELECTRIC HOTPLATES * Indicator Light for ELECTRIC HOTPLATE * Control Knobs for GAS BURNERS and ELECTRIC HOTPLATES * Ignition Button for GAS BURNERS * • The INDICATOR LIGHT FOR ELECTRIC • GAS BURNER ignition* enables a specific burner HOTPLATES* switches on whenever the selector to be lit automatically. knob is moved from the 'off' position. • SAFETY DEVICE* stops the gas flow if the flame • GAS BURNERS differ in size and power. Use the is accidentally extinguished. diameter of the cookware to choose the most appropriate burner to cook with. • Control Knobs for GAS BURNERS and ELECTRIC PLATES* adjust the power or the size of the flame. * Only available on certain models. 6 Start-up and use ! The position of the corresponding gas burner or electric hotplate* is shown on every knob. Gas burners Each burner can be adjusted to one of the following settings using the corresponding control knob: • Off A Maximum 6 Minimum To light one of the burners, hold a lit match or lighter near the burner and, at the same time, press down and turn the corresponding knob anticlockwise to the maximum setting. Since the burner is fitted with a safety device, the knob should be pressed for approximately 2-3 seconds to allow the automatic device keeping the flame alight to heat up. When using models with an ignition button, light the desired burner by first pressing the gas burners button (identifiable by the symbol), then pressing down the corresponding knob as far as possible and turning it anticlockwise towards the maximum setting. Some models are equipped with an ignition switch incorporated into the control knob. If this is the case, the ignitor is present, but not the switch (the symbol is located near...

Download now

Please, enter two numbers from picture: