Votes - 3, Average rating: 3.7 ( )

Manafacture: Gaggenau File size: 2.82 mb File name: Language of manual:

The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been Figure 1 interrupted, the timer in the display will flash with "PF" (power failure, See Fig. 1). INSTRUCTIONS PRESS DISPLAY To set the clock (example below for 1:30): 1. Press 0" "CLO" will appear in the display (Fig. 2). O Figure 2 2, Press _ _ _ pads to set the time of day to 1 _30 OQQ (Fig. 3). "CLO" wilt appear in the display. Press _. Q "CLO" will disappear and the clock will start (Fig. 4). Figure 3 Changing between 12 or 24 hour time of day display: 1. Press and hold O for 6 seconds (Fig. 3). While holding the O for 6 seconds pad down the current time of day will remain and "CLO" will Figure 4 disappear from the display (Fig. 4). CONTINUE holding the pad until a beep is heard. 2. The display will show either "12:00" (Fig. 5) or "24:00" (Fig. 6). 3. Press (_) to switch between the 12 and 24 hour time of day display. The display will show either "12:00" (Fig. 5) or "24:00" Figure 5 (Fig. 6). 4. Press _ to accept the change or press _ to reject the change. Figure 6 5. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. 16 Setting the Clock FEATURE OVERVIEW Setting Continuous Bake or 12 Hour Energy Saving Continuous Bake or The KITCHEN TIMER _ and CLEAN (_ pads control the Continuous Bake Twelve Hour Energy Saving Mode or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Kitchen Timer Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking. INSTRUCTIONS PRESS DISPLAY To set the control for Continuous Bake or 12 Hour Energy Saving features: 1. Press and hold _ for 7 seconds (Fig.l). ":12" or ":--" wilt _for 7 seconds Figure 1 appear in the display and the control will beep once. 2. Press (_) to switch between the 12 Hour Energy Saving and continuous bake features. Note: ":12" in the display indicates Figure 2 the control is set for the 12 Hour Energy Saving mode and ":--" indicates the control is set for the Continuous Bake feature (Figures 2 and 3). 3. Press _ to accept the change (Fig. 4; display will return to time of day) or press _ to reject the change. Figure 4 Setting Kitchen Timer The KITCHEN TIMER _ pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that wilt beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions. Refer to "Minumum and Maximum Control Pad Settings" on page 14 for time amount settings. INSTRUCTIONS PRESS DISPLAY To set the Kitchen Timer (exam...

Download now

Please, enter two numbers from picture: