Votes - 4, Average rating: 4.5 ( )

Manafacture: Hotpoint File size: 387.19 kb File name: CIO644DDZ_CIO642DDB_19506987900.pdf Language of manual:

The fan functions at maximum power when the large induction element is at maximum power or when the booster function is on; in all other cases, it works at average power depending on the temperature detected. Furthermore, the fan may continue to work even after switching the hob off, if the temperature detected is high. The types of noise listed above are due to induction technology and are not necessarily operational faults. ! If the - or button is pressed for an extended period of time, the display scrolls quickly though the power levels and timer minutes. Switching on the hob To switch the hob on, press and hold the © button for approximately one second. Switching on the cooking zones Each cooking zone is controlled using a selector button o2 and a power adjustment device consisting of power level selector buttons between the values of 0 and 9. • To begin operating a cooking zone, press the corresponding control button and set the desired power level using the power level selector buttons between 0 and 9. Switching off the cooking zones To switch off a cooking zone, select it using the GB and: corresponding selector button • Press power level selector button 0: this immediately returns the power setting to 0 and the cooking zone switches off. Booster function The booster function for some of the cooking zones may be used to shorten heating-up times. It may be button. The indicator activated by pressing the light directly above the button will illuminate. This function boosts the power to 2000 W or 3000 W, depending on the size of the relevant cooking zone. The booster stops automatically after 4 minutes. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e.g. if the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. Programming the cooking duration ! All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. 1. Select the cooking zone using the corresponding selector button. 2. Adjust the temperature. 3. Press the programming button. 5 4. Set the cooking duration using the and + buttons. 5. Confirm by pressing the O button. The timer begins counting down immediately. A buzzer sounds for approximately 1 minute and the cooking zone switches off when the set programme has finished. Repeat the above procedure for each hotplate you wish to programme. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To display the time remaining for the other programmed hotplates, press the © button repeatedly. The times remaining for each hotplate will be shown in a clockwise order, beginning with the front left hotplate. Changing the programme 1. Press the © button repeatedly until the duration you wish to change is shown. 2. Use the © buttons to set the new duration. 3. Confirm by pressing the © button. To cancel a programme, follow the above instructions. At step 2, press the - button: the duration decreases progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode. Timer The hob must be switched on. The timer can be used to set a duration up to 99 minutes. 1. Press the programming button until the timer indicator light is illuminated. 2. Set the desired duration using the - and + buttons. 3. Confirm by pressing the button. The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute). Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc.). Press the B button to lock the control panel: the indicator light above the button will switch on. To use any of the controls (e.g. to stop cooking), you must switch off this function. Press the B button for a few moments, the indicator light will switch off and the lock function will be removed. Switching off the hob Press the © button to switch the appliance off. If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. “Demo” mode It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the “demo” mode the hob must be switched on, with all the hotplates switched off. • Press and hold the and - buttons simultaneously for...

Download now

Please, enter two numbers from picture: