Votes - 2, Average rating: 4
(
)
)
|
Photos and specs Bionaire BU4000 |
manual abstract
1 MNBAM O K D F G E L I J C H Fig. 2 Fig. 3 Fig. 4 L A Mist Nozzle B Mist Channel C Viewing panel D Airflow outlet EWater tank support (2) F Control panel F1 Power On/Off F2 Mist Control / Humidity Level Control G Base HTransducer (not visible) I Water basin J Water level security switch K Security switch L Water outlet MWater Tanks (2) N Handle O Filter (2) F1 F2 BU4000I05M1 p.qxd 4/7/05 14:47 Page 7 U.K. and IRELAND CONGRATULATIONS By choosing a Bionaire® humidifier, you have chosen one of the finest humidifiers on the market today READ AND RETAIN THE FOLLOWING FOR FUTURE REFERENCE. Note: Carefully remove all securing tapes and two Water Filters. Keep all packaging for future storage when humidifier is not in use. GENERAL DESCRIPTION (SEE FIG. 1) A Mist Nozzle B Mist Channel C Viewing panel D Airflow outlet EWater tank support (2) F Control panel F1 Power On/Off F2 Mist Control / Humidity Level Control G Base HTransducer (not visible) I Water basin J Water level security switch K Security switch L Water outlet MWater Tanks (2) N Handle O Filter (2) IMPORTANT SAFEGUARDS Please read this manual carefully before using this appliance, as correct use will give you the best possible performance. When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions before using. • Close supervision is necessary when any appliance is used near children. Appliance must be kept out of the reach of children. • Appliance must be used by a responsible adult. • Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. • Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. If the cord is damaged, it must be replaced by the the manufacturer or a service agent in order to avoid hazard. • The use of accessory attachments not recommended or sold by Bionaire® may result in fire, electric shock or personal injury. • Do not use outdoors. • Do not let cord hang over edge of table or counter, or touch hot surface including the stove. • Do not use appliance for other than intended use. • Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning. • In the event of a momentary electrical disturbance, the product may malfunction and require user to reset the product. • Check the operating voltage shown on the back of the unit. Do not operate at higher voltage than shown. • Never turn on, plug in or unplug the humidifier while your hands are wet in order to avoid electric shock. • Ensure humidifier is level. If the humidifier is not level always turn the power off before handling it. • Do not disassemble the humidifier while it is plugged in to avoid electric shocks. • If you need to replace the plug or cable always refer to the instructions "Installation of a plug". • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person. • Do not place humidifier in front of ventilating outlets and keep away from furniture and other electrical appliances. • Do not add water directly into the mist conductor or nozzle. ASSEMBLY INSTRUCTIONS 1. Be sure the humidifier is switched off and disconnected from the wall outlet. 2. Installl the Water Filters into the base. WARNING: When installing a new Water Filter, be sure to first remove the plastic bag, then follow "Filter Use instructions". IMPORTANT: To eliminate the emission of minerals from the water, it is recommended that the Water Filter be used. 3. Position Mist Channel (B) over Base (G), carefully locate into base, (see Fig 2). 4. Insert the Mist Nozzle (A) onto the Mist channel (B), (see Fig. 2). 5. Place the water tanks on the base (see Fig. 3). IMPORTANT: Make sure the water tanks as well as the water basin are clean before using the appliance and after storing for a long time. 6. Ensure humidifier is level. If the humidifier is not level always turn the power off before handling it. OPERATING INSTRUCTIONS Fill Water Tanks NOTE: Be sure the humidifier is switched off and disconnected from the wall outlet. The water you put into the water tanks should be clean and not 2 BU4000I05M1 p.qxd 4/7/05 14:47 Page 9 be over 40°C. (cold boiled water or demineralised water are recommended). 1. Remove the water tanks out from the base. 2. Unscrew the water outlet valve (L). 3. Fill the tanks with clean water and screw the valve back tightly onto the tanks. (See Fig. 4) 4. Put the water tanks back on the base. (see Fig.4). Switch the Unit On and Off (See Fig. 1 F1) 1. Put the plug into the main supply. 2. Press Power ( ) (F1) to switch on and off the Ultrasonic Humidifier. The LED screen is lightened when the power is on. NOTE: This unit has a memory. The control panel will remember the previous mist output level setting after the unit has been turned off. However, if the unit is unplugged...