Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over. • To reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. SAVE THESE INSTRUCTIONS 3 SAVE THESE INSTRUCTIONS PRODUCT INFORMATION 1. Hose Connector Plug 2. Carry Handle 3. ON/OFF Switch 4. Heat Pad 5. Water Tank Window and Fill line 6. Hose Wrap 7. Steam Nozzle Dock 8. Steam Nozzle 9. Cord Wrap (on bottom of steamer) 10. Crease Clamp 11. Lint Brush 12. Door Hook 13. Fabric Brush PerfectSteam® Features • Safe for use on all types of fabrics • Quick heat-up • Easy fill water tank provides 30 minutes of continuous steam • Convenient integrated steam nozzle and hose storage • Convenient cord wrap • 5 foot flexible steam hose • Includes fabric brush, lint brush, crease clamp and door hook • For household use only. 4 INSTRUCTIONS FOR USE Before Beginning 1. Read all instructions including Important Safety Instructions and Warnings before use. 2. Carefully remove all contents from the packaging and inspect the product to make sure all components have been received (Fig 1). 3. Completely unwind the power cord from the bottom of the appliance. NOTE: • Do NOT attach the steam hose connector plug onto the steamer. • Do NOT plug in or turn on the unit until assembly is complete. Filling the Water Tank 1. Be sure the unit is off and unplugged. 2. Fill the water tank through the Hose Connector Opening with cold water to the desired level (Fig 2). Do NOT fill past the Maximum fill line. NOTE: Only fill the water tank with cold water. Do NOT use hot water. 3. When you have finished filling the tank, align the arrow on the steamer hose connector plug with the unlock symbol on the steamer housing, firmly push the connector down and turn clockwise so the arrow points to the locked symbol to securely lock the hose onto the steamer housing (Fig 3). 5 Using the Steamer Always check fabric labels for recommendations before steaming. Test color fastness in an inconspicuous spot. Some fabrics can be steamed better from the underside of the material. Heavy fabrics may require repeated steaming. Never steam a garment while it is being worn. 1. Place the steamer on the floor. 2. Hang the door hook on the top of a door and place the steam nozzle on the door hook with the steam vents pointing away from the door (Fig 4). 3. Plug the steamer cord into a 120V AC electrical outlet. 4. Press the ON/OFF switch to the ON position. The switch will illuminate to indicate the garment steamer is on (Fig 5). Steam will emit in approximately 5-6 minutes from the steam nozzle. NOTE: Keep the steam nozzle on the door hook until steam forms. 5. Remove the steam nozzle from the door hook with the steam vents pointing away from you. Hang the garment on a hanger and hang on the door hook (Fig 6). 6. Lightly touch the garment with the steam nozzle and steam in an up/down vertical motion starting from the top of the garment to the bottom. Always keep the hose and nozzle elevated above the steamer (Fig 6). NOTE: The steamer may make a gurgling sound during operation. This is a normal result of condensation. If this happens, extend the hose up and out so the excess moisture can drain back into the water tank. 7. When you have finished steaming, place the steam nozzle on the door hook (Fig 4) and turn the ON/OFF switch to the OFF position (Fig 5). 8. Use caution when handling until the steamer has fully cooled. 6 Using Attachments When attaching or changing attachments, be sure the unit is off, unplugged, and completely cool to avoid contact with hot water. Fabric Brush The fabric brush opens the weave of fabrics for better steam penetration. • Attach the fabric brush to the steam nozzle by lining up the back of the fabric brush with the steam nozzle slot and gently push into the slot (Fig 7). • Move the fabric brush in a downward motion from top to bottom gently brushing the fabric. Crease Clamp The crease clamp helps create straight creases. • Slide the crease clamp onto the steam nozzle by aligning the crease clamp slot with the steam nozzle tab (Fig 8). • Push the crease clamp trigger to open the crease clamp (Fig 9). • Place the garment between the crease clamp and steam nozzle. • Release the trigger. • Move the crease clamp in a downward motion from top to bottom to set a crease. Lint Brush The lint brush removes lint and pet hair from garments. • Attach the lint brush to the steam nozzle by lining up the back of the lint brush with the steam nozzle slot and gently push into the slot (Fig. 10). • Move the lint brush in a downward motion from top to bottom to remove lint and pet hair. • Clean the lint brush by brushing in the opposite direction on an old cloth. 7 After Use and S...