Votes - 4, Average rating: 4
(
)
)
|
manual abstract
Starting the Iron 1. Plug in the iron. 2. Press the PUSH ON Button and a green light will come on. (Figure B). 3. Use the HEAT SETTING GUIDE on the body of the iron to select the setting for the fabric to be ironed. (For more detail, see the “Fabric Ironing Chart” on page 11). 6 INDICATOR MARK INDICATOR MARK Figure C — Dry USING MOISTURE Figure D — Spray INDICATOR MARK Figure E — Surge INDICATOR MARK 4. Turn the TEMPERATURE SELECTOR DIAL to the appropriate setting and allow to preheat for approximately 45 seconds. NOTE: The iron will automatically shut off after one hour. (see “Automatic Shut-Off” page 8) Dry Ironing Turn the ADJUSTABLE STEAM/DRY DIAL to the INDICATOR MARK for Dry to iron without steam. (Figure C) Spray 1. Be sure the iron is filled with water before operating the SPRAY feature. 2. Move the TEMPERATURE SELECTOR DIAL to the appropriate setting. 3. Turn the SPRAY/SURGE Button so that the Spray (Figure D) faces the INDICATOR MARK. Pump the SPRAY Button a few times to get a mist. Surge of Steam 1. Be sure the iron is filled with water before using the SURGE feature. 2. Move the TEMPERATURE SELECTOR DIAL to a setting within the steam band (choose one of the settings 4 thru 7 for the appropriate fabric). 3. Turn the SPRAY/SURGE Button so that the Surge (Figure E) faces the INDICATOR MARK. Pump the SURGE Button for a concentrated blast of steam. 7 INDICATOR MARK INDICATOR MARK Figure F — Adjustable Steam AUTOMATIC SHUT-OFF Adjustable Steam 1. The TEMPERATURE SELECTOR DIAL must be set within the steam band (settings 4 thru 7) in order to produce adjustable steam. 2. Turn the ADJUSTABLE STEAM/DRY DIAL to the INDICATOR MARK for (light), (medium), and (heavy) settings. (Figure F) Use the HEAT SETTING GUIDE on the body of the iron to help you match the type of fabric to the appropriate steam setting. 3. If water spotting occurs, reduce the steam level and/or increase the heat setting on the TEMPERATURE SELECTOR DIAL. 1. The Automatic Shut-Off™ Iron is designed to shut-off automatically after one hour whether or not it is in use. After the iron has been on for 55 minutes, the power light will begin to blink. It will continue to blink for 5 minutes to alert you that the iron is getting ready to shut off. 2. To extend your ironing time once the light begins blinking or to restart the iron if it has shut off automatically, simply press the PUSH ON button and the power light will come on. 3. To shut the iron off manually, turn the TEMPERATURE SELECTOR DIAL to Off and unplug the iron. NOTE: Simply turning the TEMPERATURE SELECTOR DIAL to Off will cause the soleplate to cool down but will not shut off the iron completely (the Power Light will stay on). The Automatic Shut-Off feature will turn the iron off completely after one hour. 8 STORING THE IRON 1. Turn the ADJUSTABLE STEAM/DRY DIAL to Dry. 2. Turn the TEMPERATURE SELECTOR DIAL to Off. 3. Unplug the iron. 4. Allow the iron to cool, wrap the cord, and clip it in place using the cord clip on the plug. 5. It is not necessary to empty the water if the iron is used frequently. 6. Store the iron on its heel rest to prevent water from leaking from the Soleplate. *The Automatic Shut-Off IronTM is a trademark of The Black & Decker Corp. Care Of The Iron SURGE CLEAN™ 1. Using the Surge of Steam feature during regular ironing helps clean the steam vents. At the end of an ironing session and while the iron is still hot, use the the SurgeClean™ feature to help flush out lint. If lint is allowed to accumulate in the vents, it can scorch and cause brown spotting on garments being ironed. 2. Be sure the iron has water in it. Turn the TEMPERATURE SELECTOR DIAL to a setting within the steam band (settings 4 thru 7). 3. Turn the SPRAY/SURGE Button so that the Surge faces the INDICATOR MARK. Hold the iron over an old cloth or over the sink and pump the SURGE Button 5 or 6 times. Then iron over an old cloth to clean residue from the soleplate. 9 EMPTYING THE IRON Figure G CLEANING THE OUTSIDE SURFACES 1. Turn the TEMPERATURE SELECTOR DIAL to Off. 2. Set the ADJUSTABLE STEAM/DRY DIAL to the INDICATOR MARK for Dry. 3. Unplug the iron and allow it to cool. 4. Empty the water by holding the iron over a sink with the tip pointing downward (Figure G). Take care to avoid any hot water splatter. Water will empty out the WATER FILL HOLE. 5. If all the water hasn’t drained, repeat the emptying process. 1. Allow the iron to cool completely. 2. Wipe the outer shell and SilverStone® non-stick soleplate with a cloth dampened in water and a mild household detergent. Never use abrasives, heavy-duty cleansers, or scouring pads. Need Help? IRON 1. Is the iron plugged in and the green Power Light on? WON’T HEAT? Press the PUSH ON Button. 2. If the Light is not on, will a lamp plugged into the outlet turn on? 3. Is the TEMPERATURE SELECTOR DIAL turned to a fabric setting? IRON WON’T 1. Check to see if there is enough water in the Water START Tank. STEAMING 2. Is the ADJUSTABLE STEAM/DRY DIAL se...