Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 1.31 mb File name: Language of manual:

This is normal. • Do not allow the power cable to come into contact with the soleplate when it is hot. • Never aim the steam at people or animals. 1. Boiler.s cap 2. Removable iron pad 3. Mains cable and hose storage compartment 4. Mains cable 5. Steam hose 6. “Steam ready” pilot light 7. “Reill boiler” pilot light 8. Variable steam control * 9. Illuminated main power button (0/I) 10. Housing with internal steam generator 11. Temperature control knob 12. Steam release button 13. Iron pilot light 14. Soleplate 15. Steam button lock * 16. Filling funnel 17. Carrying handles * Model dependent apreparations 1. Remove any label or protective covering from the soleplate. 2. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad (2) from the appliance and place the iron on it on another solid, stable, horizontal surface. Never rest the iron on the appliance without the iron pad! 3. Open the boiler.s cap (1). Fill the boiler carefully using always the funnel, and close the cap irmly. Filling with warm water reduces the waiting time for heating up. Do not overill the boiler. 4. Unwind the mains cable (4) fully and plug it into an earthed socket. 5. Switch the main power button (9) on (position “I”) 6. The “Steam ready” indicator lamp (6) will light up after approximately 7 minutes, indicating that the appliance is ready to use. 7. This appliance has a water level sensor. The “Reill boiler” indicator (7) will light when the boiler is empty. 14 BOSCH Remark : if the boiler is empty, both indicator lamps (6 and 7) may light up simultaneously. Fill the boiler as indicated in paragraph “Reilling the boiler”. reillingtheboiler Attention! Risk of burns! Be careful when opening the cap, steam may escape. If the pilot lamp (7) illuminates : 1. Press the steam button (12) to check that no more steam is generated. Only then the boiler should be reilled. 2. Set the appliance switch (9) to the off position (“0”) and unplug the steam station from the mains. Then wait for minimal 2 minutes. 3. Open the cap (1) carefully and slowly. Allow remaining steam to escape. 4. Reill the boiler using always the funnel. Do not overill the boiler. 5. If there is water left around the illing inlet, please dry with a towel before closing the boiler. 6. Close the cap irmly. Important: • Normal tap water can be used. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. You can inquire about the water hardness with your local water supplier. • To avoid damage and/or contamination of the boiler, do not use perfumed water, vinegar, starch, descaling agents, additives or any other type of chemical product. any damage caused by the use of theaforementioned products, will make theguarantee void. • The iron is not designed to rest on its heal. Please always position it horizontally on the iron pad (2). The iron pad can be placed into the specially ...

Download now

Please, enter two numbers from picture: