Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 3.75 mb File name: Language of manual:

Description 1. Handle with contact sensor. 2. ActiveControl Advanced indicator lamp. (clear light) 3. Steam setting selection button. 4. Steam setting indicator lamps. green = eco red = max 5. Shot of steam button. 6. Spray button. 7. Water inlet. 8. Filling opening lid. 9. Spray nozzle. 10. Water tank. 11. Level mark for maximum illing. 12. Soleplate. 13. Temperature index. 14. Temperature control. 15. Power cable. 16. Descaling luid*. 17. Fabric-protection soleplate cover*. * Model dependent. enen Before using the iron for the irst time Remove any labels or protective covering from the soleplate (12). For further details on the following actions, please refer to the related chapters in this user manual. • With the iron unplugged, ill the tank (10) of the iron with tap water and set the temperature control (14) to “max”. • Plug in the appliance to the mains. • When the iron has reached the desired temperature, the green light (4) stops lashing and the clear light (2) starts lashing. Grip the handle (1) and set the steam control to the maximum position “max”. • Hold the iron horizontally and repeatedly press the shot of steam button (5). Any residue may come out of the soleplate (12). • If necessary, carefully clean the soleplate (12) down with a dry, folded cotton cloth. • When using the steam function for the irst time, do not use it on your laundry, as there may still be dirt in the steam dispenser. • When turned on for the irst time, your new iron may smell and emit a little smoke and a few particles; this will stop after a few minutes. Filling the water tank (1) Unplug the iron from the mains! • Open the illing openning lid (8). • Never ill beyond the level mark for maximum illing (11). • Use only clean water from the tap without mixing anything with it. The addition of other liquids, (unless recommended by Bosch) such as perfume, will damage the appliance. Any damage caused by the use of the aforementioned products will make the guarantee void. • Do not use condensation water from tumble dryers, air conditioning systems or similar. This appliance has been designed to use normal tap water. • To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. You can inquire about the water hardness with your local water supplier. Setting the temperature (2) The temperature control (14) adjusts the temperature of the soleplate (12). • Check the temperature instructions shown on the care label of the garment you are ironing. • Set the temperature control (14) to the corresponding position by lining it up with the temperature index (13) on the iron: • Synthetics •• Silk-Wool ••• Cotton-Linen • Sort your garments based on their care labels, always starting with clothes that have to be ironed at the lowest temperature. • If you are unsure what type of material the garment is made from, start ironing on the lowest temperature setting and increase accordingly. If the garment is made from mixed fabrics, set the temperature for the most delicate material. • For silk, woollen or synthetic materials iron the reverse side of the fabric to prevent shiny patches. Avoid using the spray function to prevent stains. Setting the steam amount (3) Your iron is equipped with a steam setting selection button (3) and with indicator lamps (4) showing the steam setting, according to the table below: Steam setting eco max steam off Indicator lamps Green Red Off Steam can be generated by gripping the handle (1). If the “eco” steam mode is selected, the energy consumption of the appliance will be reduced by means of reduction of electricity and water consumption. A good ironing result can be obtained on this setting for most garments. The steam setting can be changed by pressing the steam setting selection button (3). The iron runs through the following cycle: ecomax steam off enen SensorSteam The “SensorSteam” function automatically switches off the iron when the handle is no longer gripped, thus increasing safety and energy saving. When plugging the iron in, during the irst minute: • The soleplate (12) heats up to the temperature corresponding to the selected setting. • The steam generation is blocked. • The green lamp (4) lashes. After the initial 1 minute period: • “eco” setting is automatically selected. • The green lamp (4) stops lashing. • The “ActiveControl Advanced” indicator lamp (2) (clear light) goes on and starts lashing. From this moment on, when the handle (1) of the iron is gripped: • The “ActiveControl Advanced” indicator lamp (2) stops lashing. • The pump starts working and steam is generated automatically. If the handle (1) is released: • Steam generation will stop. • The “ActiveControl Advanced” indicator lamp (2) will lash • The iron shuts off automatically. If the handle is gripped again, the iron turns on. If the iron remains plugged in and is not used for several minutes: • After the handle (1) is touched, the...

Download now

Please, enter two numbers from picture: