Votes - 0, Average rating: 0
(
)
)
|
manual abstract
-Make sure the mains cord does not come into contact with the hot soleplate. -Infirm persons should not be allowed to use the appliance without super vision. Keep an eye on children to make sure that they do not play with the appliance. -If steam escapes from under the screw cap of the steam tank when the appliance is heating up, switch the appliance off and contact a ser vice centre authorised by Philips -Do not remove the screw cap from the steam tank when the steam tank is still under pressure. Follow the instructions under 'Fast refill'. Preparing the appliance for use Check if the voltage indicated on the type plate corresponds to the mains voltage in your home. Remove any sticker, protective foil or storage cover from the soleplate. Fully unwind the mains cord (I) and supply hose (H). Place the steam tank (A) on a stable, level surface. Place the iron on the iron stand (P). 1 2 3 4 5 Do not place the hot iron on the steam tank, the supply hose or the mains cord. Make sure the mains cord does not come into contact with the soleplate when it is hot. Filling the steam tank Never immerse the iron or the steam tank in water. 1 2 Make sure the on/off switch (F) and the 'steam tank on/off' switch (E) has been set to 'off' and remove the plug from the wall socket. Slowly unscrew the cap (B) of the steam tank by turning it anti- clockwise. You may hear a sound when you remove the cap.This sound is caused by the cold tank being under vacuum. This is absolutely normal. 3 Pour water into the steam tank. Do not fill the steam tank beyond the maximum level (1.5 litres). You can use tap water if it is not too hard (less than 10 DH). If the water in your area is ver y hard (more than 17 DH), we advise you to ENGLISH C C C CHILO AIGODON LANAALGODON HILO MAXO/OFFLINEN COTTON WOOL SILK NYLON use distilled water, which you can obtain from your local supermarket or chemist. Do not put perfume, vinegar, starch or chemically descaled water in the steam tank. Do not use water from a water softener. 4 Close the steam tank by firmly turning the screw cap clockwise. Fast refill 1 2 3 4 5 First set the 'steam tank on/off' switch (E) to 'off'. Press the steam activator button (M) until you no longer hear any steam escaping from the appliance. Keep the steam activator button pressed in and slowly unscrew the screw cap of the steam tank (B) by turning it anticlockwise. The steam tank will now be depressurised. Remove the mains plug from the wall socket. Fill the steam tank as described in section 'Filling the steam tank' and let the appliance heat up again. Setting the temperature Always place the steam tank on a stable, level and horizontal surface Do not put the steam tank on the soft par t of the ironing board. Always place the iron on the iron stand. Do not put the hot iron on the supply hose or the mains cord. Make sure the cord does not come into contact with the hot soleplate. 1 2 Put the mains plug in an earthed wall socket. Push the 'Steam tank on/off' . switch (E) to set it to position I.The pilot light in the switch as well as the 'Steam tank heating up' U pilot light (C) will go on. The iron heats up faster than the steam tank and you can therefore switch the iron on a few minutes after you have switched on the steam tank. 3 Set the temperature control to the required ironing temperature by turning it to the appropriate temperature indication. -Check the garment label for the required ironing temperature: -1 Synthetic fabrics (e.g. acr ylic, viscose, polyamide, polyester) -1 Silk ENGLISH C - 2 Wool - 3 Cotton, linen -When you do not know what kind of fabric the ar ticle is made of, tr y to iron a spot which will be invisible when you wear it. -Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. -Star t ironing the ar ticles that require the lowest ironing temperature, such as those made of synthetic fibres. Temperature control Type of fabric Label with ironing instructions B Synthetic fabrics e.g. acetate, acr ylic, viscose, polyamide, polyester Silk 1 C Wool 2 D Cotton Linen 3 Z Please note: Z on the table means that the ar ticle cannot be ironed. 4 Cold start: the water in the steam tank and the soleplate will now be heated up.The soleplate takes approximately 2 minutes to heat up, the water in the steam tank takes approximately 8 minutes to heat up. 5 Quick reheat: if you refill the steam tank during the ironing process, the water in the steam tank will take approximately 6 minutes to heat up. 6 Push the 'Iron on/off' . switch (F) to set it to position I. The pilot light in the switch as well as the 'Iron heating up' pilot light (K) will go on. 7 After a few minutes the 'Iron heating up' pilot light (K) will go out to indicate that the soleplate has reached the set temperature. Tips . During ironing the pilot light will go on from time to time to indicate that the soleplate is being heated up to the required temperature again.You can simply continue ironing when this h...