Login:
Votes - 2, Average rating: 4.5 ( )

User manual Philips, model GC1830

Manafacture: Philips
File size: 706.95 kb
File name:
Language of manual:enfrdenl
Free link for this manual available at the bottom of the page



manual abstract


The automatic shutoff function has been activated (see chapter ‘Features’). You put the iron in horizontal position while there is still water in the water tank. You have used the steam boost function or the vertical steam boost function too often within a very short period. The iron is not hot enough. Check the mains cord, the plug and the wall socket. Set the temperature dial to the required temperature. Fill the water tank (see chapter ‘Preparing for use’). Set the steam control to position lor ; (see chapter ‘Using the appliance’). Set the temperature dial to a temperature suitable for steam ironing ( 2 to MAX). Put the iron on its heel and wait until the temperature light goes out before you start ironing. Fill the water tank (see chapter ‘Preparing for use’). Use the Calc-Clean function one or more times (see chapter ‘Cleaning and maintenance’). Pick up the iron or move it slightly to deactivate the automatic shut-off function.The automatic shut-off light goes out. Empty the water tank and set the steam control to position O before you store the iron (see chapter ‘Storage’). Store the iron on its heel. Put the iron in horizontal position and wait a while before you use the steam boost function or vertical steam boost function again. Set the temperature dial to a temperature suitable for steam ironing ( 3 to MAX). Put the iron on its heel and wait until the temperature light goes out before you start ironing. 4239.000.6155.29 FrANcAIS Introduction Felicitations pour votre achat et bienvenue dans l’univers Philips ! Pour profiter pleinement de l’assistance Philips, enregistrez vos produits sur le site a l’adresse suivante : Description generale (fig. 1) A Spray (certains modeles uniquement) B Orifice de remplissage C Commande de vapeur -O = pas de vapeur -l= vapeur moderee -;= vapeur maximale - = fonction anticalcaire x D Bouton Spray T (certains modeles uniquement) E Effet pressing 9 (certains modeles uniquement) F Voyant d’arret automatique (certains modeles uniquement) G Voyant de temperature H Cordon d’alimentation I Tablette anticalcaire (certains modeles uniquement) J Plaque signaletique K Reservoir d’eau L Thermostat Important Lisez attentivement ce mode d’emploi avant d’utiliser l’appareil et conservez-le pour un usage ulterieur. Danger - Ne plongez jamais le fer dans l’eau. Avertissement -Verifiez que la tension indiquee sur la plaque signaletique correspond bien a la tension secteur locale avant de brancher l’appareil. -N’utilisez pas l’appareil si la fiche, le cordon d’alimentation ou l’appareil lui-meme est endommage ou s’il est tombe et/ou si de l’eau s’en ecoule. -Si le cordon d’alimentation est endommage, il doit etre remplace par Philips, un CentreServiceAgree ou un technicien qualifie afin d’eviter tout accident. -Ne laissez jamais l’appareil sans surveillance pendant qu’il est branche. -Cet appareil n’est pas destine a etre utilise par des personnes (notamment des enfants) dont les capacites physique...

Other models in this manual:
Irons - GC1701 (706.95 kb)
Irons - GC1702 (706.95 kb)
Irons - GC1703 (706.95 kb)
Irons - GC1705 (706.95 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category