Votes - 3, Average rating: 3.7 ( )

Manafacture: GE File size: 487.87 kb File name: Language of manual:

• If water still remains inside of soleplate, reheat iron as indicated in Step 2. Boiling water and steam could still flow out of steam vents. FEATURES (on select models) Adjustable Steam Switch This knob provides steam for fabrics such as wool and linen. See the “Fabric Setting Chart” for details. Set the switch to Dry Iron O to iron without steam. Spray and Blast of Steam Buttons Push Blast of Steam Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Power ON/Auto Shutoff Reset Button/Light This light comes on when the iron is first plugged in. After one hour, the iron will shut off and the light will go out. Push the Reset Button/Light to turn the iron back on. Power ON Light On units not provided with Auto Shutoff, this light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to OFF ( O ). Retractable Cord • Pull cord to desired length. Do not unwind cord beyond colored tape indicator on cord. • To store cord, press and hold the Cord Release Button while guiding the cord into the storage area. wWARNING To reduce the risk of an eye injury, hold the plug while retracting the cord. TROUBLESHOOTING PROBLEM Iron won’t heat. Water is leaking out of the iron. Iron won’t steam. Iron leaves spots on clothing. Wrinkles not removed. Fabric/clothing scorched. Twisted cord. Retractable cord will not unwind (on select models). THINGS TO CHECK • Is the iron plugged in and the outlet working? Check the outlet by plugging in a lamp. • Is the Temperature Control Dial turned to a fabric setting? • If auto shutoff model, is the Reset Button/Light illuminated? If not, push to reset. • Do not overfill the water tank. • If steam ironing, is Adjustable Steam Switch in a steam position and the Temperature Control Dial in the steam range? Did the iron have enough time to preheat? • If dry ironing, make sure the Adjustable Steam Switch is in the DRY IRON/O position. • Check the water level. If water level is low, fill using a cup with tap water to MAX fill line. • Is the Adjustable Steam Switch in a steam position? • Has the iron had enough time to preheat? • ALWAYS empty the water tank of the iron after using. Water left in the tank may discolor clothing and soleplate. • Check Temperature Control Dial is set to correct fabric. • Check Temperature Control Dial and set to lower setting. Allow iron to cool down 5 minutes before continuing. • If the cord should become twisted, first clear the steam vents and empty water from water tank. See “How to clean” section. Then turn iron to OFF (O), turn Temperature Control Dial to OFF (O), and unplug iron. Let cool. Make sure all water has been emptied from iron; then hold iron cord in the middle of entire length. Let plug and iron dangle freely until cord uncoils. This will extend the life of your iron cord. • Rewind a small amount of cord then fully depress the...

Download now

Please, enter two numbers from picture: