|
manual abstract
ron or until the iron automatically shuts itself off 3 When you finish ironing, always unplug the iron HOW TO CARE FOR YOUR IRON AFTER EACH USE 1 Turn iron off and unplug 2 Empty iron immediately after using Don’t store the iron with water in it 3 Depress the steam button down into the dry iron position 4 Wait until the iron has cooled before storing it, and always set it on the heel rest to protect the soleplate from scratching, corroding or staining 5 After letting iron cool completely, push the cord wind button to wind the cord Store iron vertically in a safe place after winding cord completely MAIN BODY After unplugging and cooling the iron, simply wipe off with a damp cloth and it necessary, use a mild detergent NEVER USE ANY HARSH CLEANERS SOLEPLATE Starch and other residue may be easily removed from the soleplate with a damp cloth To avoid scratching the finish never use a metallic pad to clean the soleplate, and never place the iron on a rough surface If synthetics are ironed at too high a temperature, not only is the fabric usually ruined, but the iron soleplate is often covered with the melted remains of the synthetic fabric The best way to remove synthetic residue from the soleplate is to heat the iron and to iron over an old cotton rag CAUTION. Never use steam iron cleaners in the iron, since they may damage the inside of the iron — 8 - FABRIC IRONING CHART NOTES 1 Check garment for specific ironing instructions Always follow manufacturer's instructions 2 Iron blended fabrics at setting for lower-temperature fiber or for the highest* percentage fiber 3 Use caution, some synthetics may melt at high temperature Temperature Selector Setting Fabric Ironing Recommendations 1 ACRYLIC * ACR1LAN * C RES LAN * ORLON ACETATE METALLICS SUEDE Dry iron on wrong side, or use a press cloth on top of fabric Don't sprinkle water directly on fabric to avoid spots To iron suede, cover ironing board with brown paper and use it as a press cloth 2 NYLON * ANTORON * CAPROLAN SILK Dry iron on wrong side 3 PERM PRESS RAYONS POLYESTER * DACRON * FORTREL * KODEL TRIACETATE * ARNEL W'n W COTTON Dry iron on wrong side To touch-up collars, cuffs, pockets, etc , iron lightly on right side 4 WOOL VELVET Steam ironing is suggested Never iron completely dry To iron velvet, steam iron holding the iron slightly above the fabric 5 COTTON Steam ironing is suggested Spnnkle water on the fabnc, depending on its thickness Iron dark fabncs on wrong side to avoid unwanted sheen 6 LINEN Steam ironing is suggested Iron dark fabncs on wrong side to avoid unwanted sheen * Trademarks of Fiber Manufacturers -9- Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, inc ("PSC") Ave 65 de mfanteria Km 9 5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 PART NO AN18200-232A PART CO 022983...
Other models in this manual:Irons - NI686E (326.22 kb)
Irons - NI-486E (326.2 kb)
Irons - NI-686E (326.2 kb)
Irons - NI-436E (326.2 kb)