Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
If the fabric is a blend, use the lower temperature setting. • If the fabric content is unknown, use the lowest temperature setting and test on an inside seam of the garment. • If ironing several items, start ironing the items which need the lowest temperature setting first. An iron heats up much faster than it cools down. • To maintain the quality of the soleplate, never iron over zippers, pins, buttons or anything metal. • Use caution when ironing around plastic buttons and zippers as these may melt. • To iron fabrics stating “Dry Clean Only,” first clean as directed before ironing. Use caution and begin ironing on the lowest setting, testing on an inside seam allowance of the garment. 9 -e- 340068700 Ev05.qxd 5/15/00 2 : 53 ?M Page ^_ Troubleshooting © QUESTION ANSWER Iron won’t heat. 1. Is the iron plugged in and the Auto Shutoff Reset Button/Light on? 2. If the iron is plugged in and the power light is not on, check the outlet by plugging in a lamp. 3. Is the Temperature/Steam Dial turned to a fabric setting? 4. If auto shutoff model, is the Auto Shutoff Reset Button light on? If not, press Auto Shutoff Reset Button/Light, located on the top of the handle, to turn the iron back on. Water Is leaking out of the iron. 1. If you over filled the water tank, empty some water. 2. If you are steam ironing, is the Temperature/Steam Dial in the steam range and did the iron have enough time to preheat? 3. If you’ve been ironing for more than one hour the auto shutoff may have turned the iron off. Press the Auto Shutoff Reset Button/Light, located on the top of the handle, to turn the iron back on. Iron won't steam. 1. Is there water in the water tank? 2. Is the Temperature/Steam Dial set in the steam range? 3. Has the iron had enough time to preheat? 4. Has the iron been cleaned with the self-ciean feature? The steam vents may be blocked. Iron leaves spots on clothing. 1. ALWAYS empty the water tank of the iron after using. Water left in the tank may discolor. 2. Clean the steam vents as Instructed in the “Self Clean II System” section. Cord is twisted. 1. If the iron cord should become twisted, unplug iron and let cooi. Hold iron cord in the middle of entire length. Let plug and iron dangle freely until cord uncoils. This will extend the life of your iron cord. 10 840068700 Ev05.qxd 5/15/00 2:53PM Page a- Customer Service If you have a question about your iron, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the bottom of your iron. This information will help us answer your question much more quickly. Hamilton Beach/Proctor-Silex, Inc. warrants this appliance to be free from defects in material and workmanship for a period of two (2) years from the date of original purchase, except as noted. There is no warranty with respect to the following, which may be supplied with this appliance: glass parts, glass containers, cutter/strainer, blades and/or agitators. This warranty extends only to the original consumer purchaser and does not cover damage from abuse, neglect, use for commercial purposes, or any other use not found in the printed directions. HAMILTON BEACH/PROCTOR-SILEX, INC. EXPRESSLY DISCLAIMS ALL RESPONSIBILITY FOR CONSEQUENTIAL DAMAGES OR INCIDENTAL LOSSES CAUSED BY USE OF THIS APPLIANCE. Some states or provinces do not allow this exclusion or limitation of incidental or consequential losses, so the foregoing disclaimer may not apply to you. If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster sen/ice please have model, series, and type numbers ready for operator to assist you.) CUSTOMER SERVICE NUMBERS In the U.S. 1-800-851-8900 In Canada 1 -800-267-2826 Web site address: KEEP THESE NUMBERS FOR FUTURE REFERENCE! This warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state, or province to province. MODEL: TYPE: SERIES: TWO YEAR LIMITED WARRANTY 11 840068700 Ev05.qxd 5/15/00 2:53PM Page Hamilton Beach »Proctor-Silex, Inc._Proctor-Silex Canada, Inc. 263 Yadkin Road Picton, Ontario KOK 2T0 Southern Pines. NC 28387 840068700 Web site address: svww.hamiltonbeach.com 5/00 840063700 Fv04.qxd s'lS/OO 2:52 ?M Page, & Hamilton Beach. Fer UltraSteam 840068700 840068700 rv04.qxd 3/15/00 2:52 _JM Page Sécurité du fer IMPORTANTES INSTRUCTIONS Lors de l’utilisation de votre fer à repasser, des précautions préliminaires de sécurité doivent toujours être observées, y compris ce qui suit : LIRE TOUTES LES INSTRUCTIONS AVANT L’UTILISATION 1. Utiliser le fer seulement pour sa fonction déterminée. 2. Pour protéger contre le risque de choc électrique, ne pas immerger le fer dans l'eau ou autres liquides. 3. Le fer doit toujours être éteint (réglé à OFF « 0 >>) avant d’être branché à une prise...