Votes - 1, Average rating: 5
(
)
)
|
manual abstract
5) To set up the wireless Mouse link, press the reset button on the bottom of the mouse. Press the connection button “connect” on the receiver simultaneously. The indicator light will turn on. Hold both buttons for approximately 30 seconds. Release the buttons. The indicator light will turn off and your mouse will be operational. 2 3:06:33 P74865uk-A_F8E846ukBNDL-DB.indb 2 13/7/05 Software Installation for Windows 98, ME, 2000, and XP 1 Note: The Keyboard and Mouse should now be functioning. If 2 they are not, repeat the setup instructions and refer to the“Troubleshooting” section for help. When the Mouse and Keyboard are operational, the software can be installed. 3___ 3 4 Warning: It is recommended that you uninstall any previously ___ installed keyboard and mouse software prior 5 to installing your new Belkin software. ___ 6 7 1. Be sure your computer is powered on. 2. Insert the CD into your computer’s CD-ROM drive. 3. If you have not previously installed Keyboard and Mouse software, click “OK” and the installation will begin. Follow the on-screen instructions. 4. Upon completion of installation, you will be prompted to restart your computer. You must restart at this time in order for the software to function. 3 3:06:33 P74865uk-A_F8E846ukBNDL-DB.indb 3 13/7/05 1 2 3 Play/Pause Start and pause the playback of your audio and video applications. StopVolume Down Decrease your system volume. Volume Mute Mute your system volume. Volume Up Increase your system volume. USB Standard Keyboard Hot Key Functions 4___ 4 5 6 ___ Previous Track 7 Next Track Mail WWW Search Sleep Back to the previous track. Go to the next track. Open your system’s default e-mail application. Open your system’s default Internet browser. Activate the search function of your Internet browser. Next Internet page. Toggle sleep function on your computer 4 3:06:34 P74865uk-A_F8E846ukBNDL-DB.indb 4 13/7/05 Troubleshooting The Keyboard and/or Mouse is/are not detected or do not work 1 after installation. 2 • Make sure the receiver is plugged into the computer's USB port. 3 • For optimal performance, place the receiver at least eight inches (20cm) ___ away from the computer monitor, any external storage devices, or other 4 electrical devices. 5___5___ • Make sure you have properly installed the batteries. Test the batteries to make sure they are not dead 6 (you can do this by installing them into another device). ___ 7 • You may have other system devices that are conflicting with the Mouse and/or the Keyboard. Check the IRQ/address setting of these devices for conflicts and change the settings as required. Please refer to your computer documentation or the manufacturer’s technical support for assistance in making these changes. • Make sure you have properly established communication/synchronization between the receiver and the Mouse and Keyboard. • If your Mouse pointer becomes choppy on-screen or the Keyboard does not register keystrokes, replace batteries swith a fresh set. • If you do not use the mouse for several minutes it will be put into a suspended state. To begin using the mouse again move the mouse or press one of the mouse buttons. 5 3:06:34 P74865uk-A_F8E846ukBNDL-DB.indb 5 13/7/05 Troubleshooting 1 • When multiple wireless keyboard and mouse sets are used in a close proximity, interference might occur. You can solve this by changing the 2 communication channel of your keyboard and mouse. 3 ___ • To change the channel of the wireless keyboard, press the reset button on the bottom of the keyboard. Press the connection button “connect” 4 5___5___ on the receiver simultaneously. The indicator light will turn on. Hold both buttons for approximately 30 seconds. Release the buttons. The indicator light will turn off and your keyboard will have changed channel. 6 ___ • To change the channel of the mouse, press the reset button on the bottom of the mouse. Press the connection button “connect” on the 7 receiver simultaneously. The indicator light will turn on. Hold both buttons for approximately 30 seconds. Release the buttons. The indicator light will turn off and your mouse will have changed channel. 6 3:06:34 P74865uk-A_F8E846ukBNDL-DB.indb 6 13/7/05 UninstallationProcessforWindows98,ME,2000,andXP 1 1. Select “Setting”. 2 2. Select “Control Panel”. 3 3. Select “Add/Remove Programs”. 4 4. Select “Belkin Wireless Mouse Driver 3.82” and 5 "Belkin Keyboard Driver 5.0" then click on “Add Remove”. _ 6___6__ 5. You will be asked if you are sure if you want to remove the selected application and all of its components. Click on “Yes”. The uninstall 7 process will begin. Follow the on-screen instructions to complete the process. 7 3:06:34 P74865uk-A_F8E846ukBNDL-DB.indb 7 13/7/05 Information 1 FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES 2 ___ FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, 3 declare under our sole responsibility that the product: F8E846ukBNDL-DB to which this declar...