Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
ESL
hp
power supply
StorageWorks
replacement
Caution: Parts can be damaged by
Note: This part is hot-pluggable. It is not
electrostatic discharge. Keep parts in their
necessary to power down the library to
containers until needed. Ensure you are
replace this part.
properly grounded when touching static-
Depending on the model, your library may
sensitive components.
look different from the ones illustrated in
this procedure.
1
2
ESL supply
power
hp
replacement
orks
StorageW
The power supply bays
by
parts in their
Parts can be damaged
are
ge. Keep e you
Caution:
dischar
Ensur
static-
ostatic
electr
until needed. touching
when
containers grounded
are located inside a
properly components.
sensitive
2
bays
supply a
The power inside
swing-out power supply
supply
1
are located power
swing-out at the rear of
module y cabinet.
E
S
L
the librar
p
o
wer supply
W
a
rning: An ESL9000 Series tape library
r
e
p
lacement
c
a
n
weigh up to 826 kg (1822 lbs) when
f
u
l
y
assembled. To reduce the risk of personal
i
n
j
u
r
y or damage to the equipment, obtain
Open
h
p
a
d
e
quate assistance to lift and stabilize the library
d
u
r
i
ng instal ation or removal procedures.
S
t
o
rageWorks
Note:
2
C
a
ution: Parts can be damaged by
the center
e
l
e
c
trostatic discharge. Keep parts in their
c
o
n
t
ainers until needed. Ensure you are
p
r
o
perly grounded when touching static-
T
h
e
power supply bays
s
e
n
s
itive components.
a
r
e
located inside a
s
w
i
ng-out power supply
either
m
o
d
ule at the rear of
t
h
e
l
ibrary cabinet.
N
o
t
e: Open
e
i
t
h
er the center
or the right-hand
on your
module at the rear of
d
o
o
r or the right-hand
1
d
o
o
r, depending on your
m
o
d
el.
door
4
door, depending
I
n
s
p
ect the contents of the kit.
W
a
rning: The power supply rack is
h
e
a
vy. Support the rack as the mounting
r
e
moval
model.
s
c
r
e
ws are loosened and the rack is lowered.
U
s
i
n
g a flat-blade screwdriver, loosen the two
3
c
a
p
t
ive screws at the top-left and top-right of the
p
o
w
er supply rack assembly.
U
s
i
n
g a 5/32-inch Al en wrench, open the rear
a
c
c
ess door.
of the kit.
the library cabinet.
the contents
4
Inspect
removal
rack is
supply
3
The power
rack as the mounting
ed.
Warning:
t the
. Suppor
the two
heavy
and the rack is lower
, loosen
of the
screws are loosened
screwdriverand top-right
a flat-blade
Using
bly.
screws at the top-left
assem
Note: Open
captive
rack
supply
power
the rear
open
wrench,
Allen
a 5/32-inch
Using door.
either the center
access
door or the right-hand
door, depending on your
Inspect the contents of the kit.
model.
3
removal
4
Warning: The power supply rack is
heavy. Support the rack as the mounting
screws are loosened and the rack is lowered.
Using a flat-blade screwdriver, loosen the two
Using a 5/32-inch Allen wrench, open the rear
captive screws at the top-left and top-right of the
access door.
power supply rack assembly.
...Other models in this manual:
Media Storage - ESL9322 0 Drives 222 Slots (623.14 kb)
Media Storage - ESL9322 Extended Tape Library (623.14 kb)
Media Storage - ESL9322L1 2 LTO Ultrium 230 Drives 222 Slots (623.14 kb)
Media Storage - ESL9322L1 8 LTO Ultrium 230 Drives 222 Slots (623.14 kb)