Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Media Storage - HP SAN Solutions (3.53 mb)
Media Storage - HP SAN Solutions (10.68 mb)
manual abstract
•
Supports physical host discovery of HP-UX, RHEL, SUSE, HyperV, VMware ESX, and Microsoft
Windows. Also supports virtualization by discovering virtual machines associated with HyperV
and VMware ESX.
•
Detects host operating system details and the details of the HBA attached to the host.
•
Provides XP firmware recommendations for XP storage devices in the report.
•
Supports data collection from Microsoft windows hosts configured with Internet Protocol version
6 (IPv6) addresses.
•
Provides support for 3PAR, P9500, P6500 and P6300 storage systems.
•
Send Logs provides a way to quickly send the logs with a click of a button.
•
Mail acknowledgement to sender’s email id informs the customer about the processed report
sent to the mail id mentioned in SV GUI.
•
Check for SDG Fabric non-adherence run through captured SAN information and tries
analyzing it for any potential SDG non-adherence and generate recommendations in the
processed report based on the output of the non-adherence check.
•
SAN components compatibility check analyzes compatibility for the SAN components available
in the report.
Prerequisites
Following are the prerequisites to install and run HP Storage SAN Visibility:
•
Internet Explorer 8 or Internet Explorer 9 is required to view the HTML report.
•
To use the HP Storage SAN Visibility 6.0 software, following are the necessary applications
that must be installed on a host where HP Storage SAN Visibility is installed:
◦
32-bit JRE, v1.5 or v1.6 is required to install HP Storage SAN Visibility.
◦
Brocade SMI-Agent (120.6.0 a) installed for SMI-S based data collection. For more
information, see the SMI-Agent user guide.
NOTE:
Brocade SMI-Agent installation is not mandatory for SAN Visibility data collection.
If Brocade SMI-Agent is not installed, then the collection takes place through SNMP (and
Brocade APIs). For more information, see the HP Storage SAN Visibility 6.0 User Guide.
◦
WMI Mapper must not be installed before installing HP Storage SAN Visibility. If WMI
Mapper is installed before installing HP Storage SAN Visibility then, HP Storage SAN
Visibility's installation does not proceed and displays the following message and aborts
the installation:
The Installer found an instance of WMI Mapper running on this
machine. Installing HP Storage SAN Visibility may affect other
HP’s product. Please install HP Storage SAN Visibility on machine
where WMI Mapper is not installed.
•
SSH (or Secure SHell) based data collection is supported only for Brocade switches with
firmware version 4.0 and later.
Prerequisites
5
...