Votes - 0, Average rating: 0
(
)
)
|
manual abstract
About this Document
Caution: Always plan the rack installation so that the
heaviest item is on the bot om of the rack. Install the
Installation
This document gives detailed instruction on the installation of the
heaviest item first, and continue to populate the rack from
HP StorageWorks NAS 2000s or 4000s into HP-branded racks
the bot om to the top.
Instructions
and third party racks. It provides the following installation
information:
■
Selecting a Site
Note: Rack components are removed for clarity.
■
Rack Planning Resources
hp StorageWorks
■
Identifying the Server Shipping Carton Contents
■
Installing Options
NAS 2000s and 4000s
■
Installing the Server into the Rack
■
Server Description
■
Optional External Storage Enclose
■
Powering Up and Configuring the Server
1
Left and right standard rack
3
Rack template
■
Registering the Server
rail assemblies
4
Cable management arm
2
Server rails
For more information on the server, refer to the QuickSpecs at
www.hp.com.
Installing Option
2. Secure each server rail to the server.
Selecting a Site
Install any hardware options before initializing the server. For
Select an installation site that meets the following requirements:
options installation information, refer to the option
documentation. For server-specific information, refer to the
■
Space
Supplemental Setup booklet.
■
Temperature
Installing the Server into the Rack
■
Power
■
Rack
Follow the steps in this section if you are installing the server into
■
Grounding
a HP-branded rack or a third-party rack with square holes. If you
are installing the server into a rack with round holes, order the
■
Airflow
appropriate rack installation option kit, and then refer to the
installation instructions that ship with the option kit for more
© Copyright 2003 Hewlett-Packard Development Company, L.P.
Rack Planning Resources
3. Secure the left and right standard rack rails to the appropriate
information.
side of the rack.
Hewlet -Packard Company makes no warranty of any kind with regard to
this material, including, but not limited to, the implied warranties of
The rack resource kit ships with all HP-branded racks. If you
merchantability and fitness for a particular purpose. Hewlet -Packard shall
intend to deploy and configure multiple servers in a single rack,
Note: The steps in this section work with most third-party racks with
WARNING: To reduce the risk of personal injury or
not be liable for errors contained herein or for incidental or consequential
square holes. If they do not work with the rack you are using, order the
refer to the white paper on high-density deployment in
equipment damage, be sure that the rack is adequately
damages in connection with the furnishing, performance, or use of this
option kit for racks with round holes.
HP-branded racks at www.hp.com.
stabilized before sliding the server rails into the rack rails.
material.
This document contains proprietary information, which is protected by
Identifying the Server Shipping Carton
If you are installing the server into a Telco rack, order the
copyright. No part of this document may be photocopied, reproduced,
appropriate option kit at www.racksolutions.com/hp.
or translated into another language without the prior written consent of
Contents
Caution: Be sure to keep the server parallel to the floor
Hewlet -Packard. The information contained in this document is subject to
Follow the server-specific instructions on the website to install
when sliding the server rails into the rack rails. Tilting the
change without notice.
the rack brackets.
server up or down could result in damage to the rails.
Unpack the server shipping carton and locate the materials and
Product names mentioned herein may be trademarks of their respective
documentation necessary for installing the server. All the
After installing the brackets, follow the steps in this section.
companies as reflected by an associated footnote.
rack-mounting hardware necessary for installing the server into
Hewlet -Packard Company shall not be liable for technical or editorial
the rack is included with the rack or the server.
errors or omissions contained herein. The information is provided “as is”
WARNING: When installing a server in a Telco rack, be
without warranty of any kind and is subject to change without notice. The
The contents of the server shipping carton include:
sure that the rack frame is adequately secured to the top
and bot om of the building structure.
warranties for Hewlet -Packard Company products are set forth in the
■
Server
express limited warranty statements for such products. Nothing herein
should be construed as constituting an additional warranty.
■
Printed setup documentation and software products
Printed in the U.S.A.
■
Power cord
■
Rack-mounting hardware
In addition to these supplied items, you may need:
■
Application software diskettes
4. Extend the slides from the standard rack rails, and then slide
HP StorageWorks NAS 2000s and 4000s Installation Instructions
■
Options to be installed
the server rails into the slides.
Second Edition (September 2003)
Part Number: 345648-002
345648- 002
1. Mark the rack.
See other side
...Other models in this manual:
Media Storage - HP StorageWorks NAS 2000s Base Model (815.84 kb)
Media Storage - HP StorageWorks NAS 2000s External SCSI us (815.84 kb)
Media Storage - HP StorageWorks NAS 2000s Internal SCSI euro (815.84 kb)
Media Storage - HP StorageWorks NAS 2000s Internal SCSI us (815.84 kb)