Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
HP StorageWorks
Overview
All-in-One SB600c Storage
Installation of a storage and server blade requires the following steps:
Blade installation instructions
1. Install and configure an HP BladeSystem c-Class enclosure.
2. Install any blade options.
3. Instal interconnect modules in the enclosure.
4. Connect the interconnect modules to the network.
5. Install a storage and server blade.
6. Complete the storage and server blade configuration.
Installing an HP BladeSystem c-Class
enclosure
Before performing any blade-specific procedures, install an HP
BladeSystem c-Class enclosure.
The most current documentation for blades and other HP
BladeSystem components is available at the HP website
(http://www.hp.com/go/bladesystem/documentation).
Documentation is also available in the following locations:
• Documentation CD that ships with the enclosure
• HP Business Support Center website (http://www.hp.com/support)
• HP Technical Documentation website (http://docs.hp.com)
Installing blade options
Before instal ing and initializing the storage and server blade, install
any blade options, such as an additional mezzanine card. For blade
options installation information, see the HP ProLiant BL460c Server
© Copyright 1999, 2008 Hewlet -Packard Development Company,
Blade User Guide on the Documentation CD or on the HP website
L.P.
(http://www.hp.com/go/bladesystem/documentation).
First edition: September 2008
The information in this document is subject to change without
notice.
Installing interconnect modules
Printed in Puerto Rico
For specific steps to instal interconnect modules, see the documentation
that ships with the interconnect module.
www.hp.com
To support network connections for specific signals, install an
interconnect module in the bay corresponding to the embedded NIC or
mezzanine signals.
*AG780-96002*
Page 1
...Other models in this manual:
Media Storage - HP StorageWorks SB600c AiO 1.16TB SAS Storage Blade (312.83 kb)