Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Position both Safety Spotters (23, 24) directly under the Weight Gliders (31, 32). 24 32 31 23 34 35 1 1 ATTACHING WEIGHTS TO THE BARBELL To use the Barbell (35), slide the desired amount of weight (not included) onto each end of the Barbell. Secure the weights with the Large Weight Clips (61). Note: To use standard weights, the Weight Adapters (33) should be removed from the Barbell. Attach weights to the Barbell with the Small Weight Clips (not shown). 35 33 61 WARNING: Always set both safety spotters at the same height. WARNING: Do not place more than 260 pounds on the barbell. Always secure the weights with weight clips when they are on the barbell. Always place the same amount of weight on each side of the barbell. 15 ADJUSTING THE BACKREST To raise the Backrest (15), grip the end of the Backrest with one hand and pull it upward. The Backrest Adjustment Frame (36) will automatically lock into one of the tabs on the bracket on the Bench Frame (5). To lower the Backrest (15), grip the end of the Backrest with one hand and pull it slightly upwards. Grip the handle (not shown) on the right side of the Backrest Adjustment Frame (36) with your other hand and pull the Backrest Adjustment Frame free of the tabs on the bracket on the Bench Frame (5). Lower the Backrest to the desired position and lock the Backrest Adjustment Frame into the desired tab on the bracket on the Bench Frame. 15 36 5 Handle Adjustment Bracket ADJUSTING THE SEAT To raise the Seat (14), lift the narrow end of the Seat until the appropriate tab on the Seat Adjustment Bracket (45) engages the welded pin (not shown) on the right side of the Bench Frame (5). To lower the Seat (14), use the handle on the Seat Adjustment Bracket (45) to disengage the Seat Adjustment Bracket from the pin. Lower the Seat to the desired position and engage the appropriate tab on the Seat Adjustment Bracket to the pin. 14 Pin Handle 5 45 Part List—Model No. IMBE53991 R1200A Key No. Qty. Description Key No. Qty. Description 1 2 Upright 35 1 Barbell 2 2 Brace 36 1 Backrest Adjustment Bracket 3 4 M6 x 16mm Screw 37 1 Seat Support Tube 4 4 M6 x 55mm Bolt 38 2 M8 x 30mm Bolt 1 Bench Frame 39 2 M8 x 60mm Bolt 6 14 M10 Washer 40 8 M10 x 65mm Carriage Bolt 7 2 Base 41 4 M8 x 70mm Bolt 8 1 Middle Crossbar 42 4 M10 x 65mm Bolt 9 1 Top Crossbar 43 2 M10 x 25mm Button Head Bolt 2 50mm x 70mm Outer Cap 44 2 Large Washer 11 28 M10 Nylon Locknut 45 1 Seat Adjustment Bracket 12 2 Large Support Plate 46 10 M10 x 70mm Bolt 13 1 Curl Pad 47 2 50mm Bushing 14 1 Seat 48 2 25mm Bushing 1 Backrest 49 8 45mm x 45mm Bushing 16 3 Small Support Plate 50 2 M8 x 20mm Bolt 17 6 50mm Square Outer Cap 51 2 25mm Round Inner Cap 18 2 Weight Guide 52 10 M8 Washer 19 1 Front Leg 53 2 M10 x 25mm Bolt 1 Base Crossbar 54 11 M8 Nylon Locknut 21 2 Weight Storage Tube 55 1 M10 x 115mm Bolt 22 2 M10 x 180mm Bolt 56 1 M10 x 80mm Bolt 23 1 Right Safety Spotter 57 1 15mm x 10.5 mm x 56mm Spacer 24 1 Left Safety Spotter 58 1 25mm x 50mm Inner Cap 1 Small Stabilizer 59 4 M8 x 65mm Carriage Bolt 26 1 Large Stabilizer 60 1 M6 x 38mm Bolt 27 2 Backrest Tube 61 2 Large Weight Clip 28 8 20mm x 40mm Inner Cap 62 2 Small Weight Clip 29 4 38mm Bushing 63 1 M8 x 80mm Bolt 5 M6 Washer 64 1 Right Spotter Hook 31 1 Right Weight Glider 65 1 Left Spotter Hook 32 1 Left Weight Glider # 1 User’s Manual 33 2 Weight Adapter # 1 Exercise Guide 34 1 Locking Bar # 1 6mm Allen Wrench Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the user’s manual for information about ordering replacement parts. 28 30 4 30 4 28 28 27 15 13 28 36 56 45 3 11 46 19 17 40 25 17 35 44 43 33 34 17 39 18 41 11 40 54 59 29 29 29 33 44 43 31 23 24 50 32 50 54 40 17 54 7 39 59 41 12 17 11 46 21 42 11 2 1 18 16 46 38 11 11 54 17 54 12 20 8 11 11 9 11 11 2 42 46 46 21 1 38 16 46 51 51 49 49 6 11 55 6 6 11 57 22 6 14 22 6 11 11 3 37 63 58 11 5 11 10 40 26 10 60 30 47 47 48 48 49 49 49 49 49 11 53 11 53 49 52 52 7 52 6 6 52 6 6 52 52 61 62 16 54 64 65 54 52 52 Exploded Drawing—Model No. IMBE53991 R1200A Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information when calling: • The MODEL NUMBER of the product (IMBE53991) • The NAME of the product (IMAGE® 4.8 weight bench) • The SERIAL NUMBER of the product (see the front cover of this manual) • The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED DRAWING at the center of this manual). Limited Warranty ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under...