Login:
Votes - 5, Average rating: 4 ( )

User manual Image, model KPS-FID

Manafacture: Image
File size: 145.55 kb
File name: 88a4f830-ce0d-49a0-9fbc-836fa386bce1.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Keys Fitness and our Power System Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at within 10 days of purchase. POWER SYSTEM SERIES MODEL: KPS-FID • QUESTIONS? CALL 1-800-683-1236 Monday-Friday 8:30-5:30 Central Time When calling please have the following product information available: Model Name : Manufactured Date : PO # : Model Name Decal Location • BEFORE YOU START Prior to assemby, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s Manual and are familiar with safety information and precautions. SAFETY PRECAUTIONS • This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. • Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! • Always examine your unit before using to ensure all parts are in working order. • Do not leave children unsupervised near or on the unit. • Service to your Power System unit should only be performed by an authorized service representative, unless authorized and/or instructed by a Keys Fitness technician. Failure to follow these instructions will void the warranty. • ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Main Frame (1) to U Front Base (2) with Bolts (16), Washers (13) and Nylon Lock Nuts (14). Connect Main Frame (1) to Rear Base (3) with Bolts (15), Washers (13) and Nylon Lock Nuts (14). Screw Knob (26) into Main Frame (1) underside. This Knob is used to tighten down any attachment used in your KPS-FID Bench. • ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2STEP 3 STEP 4 Connect Seat Pad (9) to Seat Support Frame (4) using Bolts (17) and Washers (18). Slide Pin (10) down into Main Frame (1) and secure with Washer (13) and Nylon Lock Nut (14). Connect Spring (24) between Main Frame (1) and Pin (10). Connect Seat Support Frame (4) to Main Frame (1) using Bolt (12), Washers (13) and Nylon Lock Nut (14). Seat can then be adjusted by pulling Pin (10) toward rear of unit. • ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 5STEP 6 STEP 7 Connect Back Pad (8) to Back Pad Support Frame (5) using Bolts (17) and Washers (18). Connect Back Pad Support Frame (5) to Main Frame (1) using Bolt (12), Washers (13 ) and Nylon Lock Nut (14). Connect Adjustable Back Pad Frame (6) to Back Pad Support Frame (5) using Bolt (12), Washers (13) and Nylon Lock Nut (14). Slide Bolt (12) through Adjustable Back Pad Frame (6) and Plastic Sleeve (7) secure with Washers (13) and Nylon Lock Nut (14). Slide Roller Pad Tube (31) into Leg Support (29). Place Upholstered Roller Pad (32) on each side of Roller Pad Tube (31) - secure with Big Plugs (33). Attach Leg Support (29) to Main Frame (1) using L Pin (34). • PARTS LIST KPS-FID Parts List Rev B REF # ITEM DESCRIPTION QTY 1 223-00060 MAIN FRAME KPS-FID 1 2 223-00059 U FRONT BASE, KPS-FID/KPS-FI 1 3 223-00319 REAR BASE M-FID 1 4 219-00002 SEAT SUPPORT FRAME KPS-FID 1 223-00061 BACK PAD SUPPORT FRAME KPS-FID 1 6 219-00123 ADJ BACK PAD KPS-FID 1 7 206-00051 PLASTIC SLEEVE,KPS-FID 1 8 228-00054 BACK PAD KPS-FID 1 9 228-00055 SEAT PAD KPS-FID 1 210-00009 PIN 1 11 202-00026 IRON BUSHING, 25X12.2X8 6 12 202-00075 BOLT, M12*125 4 13 202-00222 WASHER, 13X26X2 17 14 202-00092 NYLON NUT, M12 9 202-00123 BOLT M12*75 2 16 202-00126 BOLT M12*80 2 17 202-00083 BOLT, M10*70 4 18 202-00259 BIG WASHER 10, 11*30*2 4 19 206-00049 END CAP 50.8*76.2 2 206-00274 END CAP, 50.8 2 21 206-00052 SMALL GRIPS 1 22 206-00006 PLUG 40*80 2 23 202-00221 BALL HEAD FOR PIN 1 24 202-00118 SPRING 1 206-00036 WHEEL 2 26 210-00025 KNOB 1 27 206-00114 PLASTIC SLEEVE, 50.8x44.5 1 28 206-00001 PLUG 50.8*76.2 1 29 219-00030 LEG SUPPORT KPS-FID 1 206-00002 PLUG 50.8*50.8, 206-00065 1 31 219-00422 ROLLER PA...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category