Votes - 4, Average rating: 3.8 ( )

Manafacture: Star Trac File size: 4.95 mb File name: Language of manual:

Photos and specs  Star Trac  E-TRi

Check with your provider to insure the best possible output. In this menu you will also select what channels you would like your Personal Viewing Screen to show. You will also select the Language that will appear in the Sub Menus setup screens. Refer the remainder of this section for a more complete description of each sub category. STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE TUNING BAND Air: Use this selection when a terrestrial(indoor/outdoor) antenna is used. Cable: Use this selection for standard analogue cable. Consult cable provider of cable type prior to set up. HRC: Harmonically related carriers. IRC: Incrementally related carriers. CABLE AUTO: Use to automatically sense the cable type. CABLE MODE When you set Tuning Band to CABLE, your menu selections will change. Cable mode will set the type of cable service you are using. Consult cable provider for cable type. For digital cable, VSB/QAM is supported depending on transmission system. When QAM is set, 64/256 QAM is automatically detected and set. VSB: When transmission is 8VSB, set cable mode to VSB. QAM: When transmission is 64/256 QAM, set cable mode to QAM. NONE: When Digital cable is not used, set cable mode to NONE This works only when Tuning Band is set to cable. For digital cable, please check whether the transmission system is 8VSB, 64QAM or 256QAM with your cable provider. In addition, encrypted signals cannot be displayed. AUTO CH SEARCH Navigate to the Auto CH Search, and push the button. Broadcasting frequencies are automatically searched and saved. The search starts from analog broadcasting to digital, and it takes 2~4 min. Channel numbers are allocated for weak signals from analog broadcasting. As for digital, however, weak signals or signals without broadcasting info are ignored. MANUAL CH SET Move to a channel you want by using and . Push to change between Viewable, Not Viewable, and Favorite (Favorite will act the same as Viewable). When you are finished modifying the Channel set, press , , and , at the same time, to exit this menu and return to the Channel Sub Menu. STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE CHANNEL LABELS You can change the channel labels for each of the viewable channels. Analog channels are shown as ------ because there is no channel name info. Digital channels without channel info will also be displayed as ------. Some channels of digital broadcasting may be misnamed. Use the and to navigate between channels. Use the and to move to the next letter of the selected channel, or back to the channel selection area. Once you are in the label area use and Sub Menu. space. When you are finito scroll through the Alpha Numeric. shed labeling the channels you want, pressUse the to move to the next to return to the Channel MENU LANGUAGE Push to change between Menu Languages (English, French and Spanish). Menu Language changes as you select, but the Main Menu remains in English. ADJUSTING IMAGE QUALITY VIDEO MENU NTSC Contrast 72 Brightness 55 Sharpness Color Tint 66 72 51 Color Temoerature Normal Aspect Ratio Normal Settings Preset Move Select Exit The Video Menu on you Personal Viewing Screen is much like any standard Video display. This section will allow you to change the visual look of the screen. Use the or move between selections. Press the to enter the the selected item. Use the and to adjust the item, when you are finished press to return to the ViCONTRAST: Adjust the white level of the picture. deo Menu. STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE BRIGHTNESS: Adjust to brighten or darken the picture. SHARPNESS: Further you go left, more the screen softens, and further you go right, more the screen sharpens. Caution: When sharpness is too high, video noise soars in some videos which may cause problems in image quality. Normal setting is recommended. COLOR: Adjust to increase or decrease the Color intensity. TINT: Adjust color tone. COLOR TEMPERATURE: Default to NORMAL ASPECT RATIO: Image size on screen, Default to NORMAL. SETTING: When you execute this menu, all video-related values which were previously set will reset to the factory default. ADJUSTING AUDIO QUALITY AUDIO MENU NTSC Audio Language English Bass 60 Treble 50 Balance Digital Audio Output Raw Settings Preset Move Select Exit The Audio Menu will allow you to adjust the sound features for your Personal Viewing Screen. Use the or move between selections. Press the to enter the the selected item. Use the and to adjust the item, when you are finished press to return to the Audio Menu. AUDIO LANGUAGE: Audio Language supports digital broadcast audio, as digital broadcasts may include several channels of audio. Note: In some digital channels, audio language is not English, although English is set as audio language. It can be regarded as an error in terms of broadcasting information, but there should not be any problem functioning. BASS: Will adjust the bass tone of the sound output. STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE NTSC TREBLE: Will...

Download now

Please, enter two numbers from picture: