Login:
Votes - 4, Average rating: 3 ( )

User manual Huffy, model 540D

Manafacture: Huffy
File size: 597.83 kb
File name: c41c82ab-82f5-4464-6536-d2f2013d5181.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


20 4 203104 Bolt, Hex Flange, 5/16-18 x 2 Long 21 2 200837 Spacer, Plastic 22 2 201562 U-bolt, Round, 3/8-16 x 2-3/4 Long 23 1 Net 24 1 201190 Cap 25 1 203124 Tie Down Stake 26 2 201651 Spacer, Wheel Axle 27 1 201568 T-Strap 28 1 201189 Tank Cap 29 4 200516 Bolt Covers, Black Vinyl * You may have extra parts with this model. * Units with 42” steel frame acrylic backboard do not require the use of included board struts (.75” x 22”) HARDWARE IDENTIFIER (BOLTS & NUTS) Item #12 (1)Item #8 (5) Item #14 (2) Item #15 (6)Item #6 (1) Item #9 (1) Item #20 (4) HARDWARE IDENTIFIER (OTHER) Item #10 (6)* Item #17 (12)* Item #19 (8)* Item #26 (2) Item #5 (1) Item #29 (4)* ID# 21198805 10/05 6 SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this section: * Units with 42” steel frame acrylic backboard do not require the use of included board struts (.75” x 22”) NOTE: TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) 9/16” and 1/2” Item #5 Item #10 AND/OR Item #6 Item #15Item #9 9/16” and 1/2” Item #14 Item #26 Item #12 Item #8 Item #19 7 10/05 ID# 21198805 1. 1Remove contents from tank 2. 6 5 Install rod (5) through holes in bottom pole section (4) and eyebolt (6). 4 5 4 6 ID# 21198805 10/05 8 3. 3. Install wheel axle (2) through wheel carriage (7) and install wheels (3) onto wheel axle (2) with spacers (26) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (4) to tank and wheel bracket as shown, a deep socket is recommended. IMPORTANT! DO NOT OVER TIGHTEN. 8 4 5 6 2 26 26 3 3 7 TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! THE SPACER (26) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE. IMPORTANT!: 4. Secure tank struts (11) to pole. Rotate non-secured ends of tank struts (11) outward to mounting holes in tank as shown. TIGHTEN BOLT (9) IN LOCK NUT (12) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE. WARNING! 10/05 ID# 211988059 9 11 1 12 11 10 10 5. 11 11 1 11 15 10 10 14 Secure non-secured ends of tank struts (11) to tank as shown. Repeat for opposite side. 5. 11 11 1 11 15 10 10 14 Secure non-secured ends of tank struts (11) to tank as shown. Repeat for opposite side. 6. 18 24 22 8 19 Attach extension arm (18) to pole using U-bolt (22), washers (19), nuts (8), as shown. Install pole cap (24) as shown. DO NOT LEAVE ASSEMBLY UNATTENDED WHEN EMPTY; IT MAY TIP OVER. WARNING! ID# 21198805 10/05 10 SECTION B: ASSEMBLE THE BACKBOARD This is what your system will look like when you’ve finished this section: TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION 1/2” 1/2” OR Item #15 Item #19 Item #17 Item #29 Item #20 11 10/05 ID# 21198805 ID# 21198805 10/05 12 Do not use washers here on spring return style rims. 20 19 16 21 15 18 10 29 7. Install backboard assembly to the pole assembly as shown. Attach backboard and rim (16) to the extension arm (18) using bolts (20), spacers (21), washers (10, 19) and nuts (15) as shown. Tighten completely. Attach bolt covers (29). TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! Peel protective film from surface of acrylic backboard prior to use. NOTE: BOARD STYLE MAY VARY NOTE: 8. IInnssttaallll nneett cclliippss.. WARNING: Use of this product without proper installation of net clips, or when all net clips are not present could result in bodily harm. Be sure to follow directions carefully. CLIP “ARM” CLIP “BODY” USE OF THIS PRODUCT WITHOUT PROPER INSTALLATION OF SMART CLIPS®, OR WHEN ALL SMART CLIPS® ARE NOT PRESENT COULD RESULT IN BODILY HARM. BE SURE TO FOLLOW DIRECTIONS CAREFULLY. WARNING! AABB16 17 Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in the direction indicated by arrow. Push second “arm” back and into ram as shown. CC Twist “body” of clip slightly again to spread “arms” of clip. Clip “arms” must be flat and touching edge to edge as shown, not overlapping. 13 10/05 ID# 21198805 NET INSTALLATION NET INSTALLATION SIDE VIEW NET NETCLIP 9. 16 1723 Insert net into bottom of clip as shown. Twist net until it snaps into position. SIDE VIEW Net must be centered through clip. NET NETCLIP ID# 21198805 10/05 14 SECTION B: SECURING THE SYSTEM SECTION B: SECURING THE SYSTEM 1. Place assembled unit to desired location. Fill tank with water (30 gallons/114 liters) or sand (360 lb./163 kg) and snap tank cap (28) in place. Insert T-strap (27) through slot on back of base as shown. Secure unit to ground by twisting tie down stake (25) into ground and hooking T-strap (27) 28 27 25 27 onto tie down stake (25). 27 ADD TWO GALLONS (7.6 LITERS) OF NON-TOXIC ANTIFREEZE IN SUBFREEZING CLIMATES. CAUTION! TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PRO...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category