Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Pull plastic strip to remove from unit. 2. Press and hold any key until the screen is activated. 3. The unit will automatically prompt you to set your user profile. Refer to Setting Mode Steps 3-5. To effectively use the pedometer for calculating calorie burned (based on step count and user body weight) and distance walked (based on step count and length of user’s stride), you are advised to set the time and your user data in the Setting Mode. The unit will automatically set a 10 km target the first time it is switched on or after each battery change. CARRYING THE PEDOMETER The PE903 can be carried around the neck or in pockets and handbags by using the adjustable strap provided. battery replacement The pedometer uses a CR2032 3V battery, which has already been installed. Indicates battery power is low. To replace battery: 1. Use a small Phillips screwdriver to remove battery compartment lid. Once opened, please keep the screw in a safe place to avoid losing it. 2. Remove the old battery and insert the new one, matching the polarities. 3. Replace the lid by screwing it back into place using a Phillips screwdriver. NOTE When the battery compartment is opened or battery is replaced, all data in the pedometer will be reset. IMPORTANT Remember to set the time and your user data after every battery replacement. Operation modes The PE903 has 4 modes of operation. Press MODE to navigate between these modes when banner is displayed. DAILY MODE In the Daily Mode, you can: • view the current step count and distance walked • calories burned • calendar / clock Press DISP to toggle between displays: Current step count Distance walkedCalories burnedExercise time (Exercise timer is displayed) ClockCalendar TIP Press MODE to jump to Target Mode. TARGET MODE In the Target Mode, you can view: • the target step and distance • the completed time and distance (already covered) • the time and distance remaining to complete set target NOTE Unit automatically toggles between screen displays. Target: Steps you wish to accomplishDistance you wish to accomplishTime already completedDistance already completedTime you have to reach targetDistance remaining to reach targetDaily Mode bannerDefault screen (Daily Mode) Current step countDistance walked TIP Press MODE to jump to Daily Mode default screen. MEMORY MODE In the Memory Mode, you can view: • the step / distance walked on previous day • accumulated step / distance walked • accumulated time / calories burned NOTE Unit automatically toggles between screen displays. Data from previousToday’s record ( ) Accumulated steps walkedAccumulated distance walkedAccumulated timeAccumulated calories burnedDaily Mode bannerDefault screen (Daily Mode) Current step countDistance walkedday ( ) Steps recordedDistance recorded TIP Press MODE to jump to Daily Mode default screen. To reset records: The pedometer is designed to automatically reset when the current step counter reaches 999,999. This will also reset the target. Please set target distance again. Alternatively, setting a new target distance will also reset the current step counter and return it to 0. Setting Mode In the Setting Mode, you can set : • Target distance / finish time • Clock / calendar • User’s weight and measurement unit (kg / lb); stride length and measurement unit (cm / in) NOTE Once measurement unit has been set in Stride (User profile sub setting), all other units will automatically follow the same format (imperial / metric). 1. Press MODE to enter the Setting Mode. 2. Press DISP to toggle between sub modes (Target / Time & distance / User profile). 3. Press SET to enter individual setting. 4. Press DISP to increase values or MODE to decrease values. You can press and hold these buttons to rapidly change the values. 5. Press SET to confirm and move to next setting. Sub-mode Item Setting Options TARGET Dist 10/25/42 km (6.21 / 15.5 / 26 mi) Finish time Increments of 1 hour (up to 5 hours) You can only change this when setting target. TIME & DATE Hour format 12/24 Hour 0 - 24 Minute 0 - 60 Year 2000 - 2050 Display Format D / M or M / D Month Jan - Dec Day 1 - 31 USER PROFILE Stride Unit in cm / in Length Weight Unit in lb / kg Weight NOTE You can press SET to skip through settings. ANIMATIONS This unique feedback feature motivates you to try harder and reminds you of your set target. Once target has been set, the following graphics may be displayed: Every 24 hours Hey C’mon let’s walk No movement detected after 1 hour LL-AA-ZZ-YY! C’mon let’s move! Fail to complete target distance within target timeframe C’mon, try that challenge again Successfully complete target distance Congratula- tions! You’re the marathon champ! Good job! Let’s go for (25 / 42) km! Y? Press SET Press SET to Set target Or Press DISP to jump to Daily Mode Other animations (unrelated to target): Prior to entering sleep mode (to conserve energy) Prior to reset (when no target has been set) 950,000 steps achieved System will soon reset, keep on walking! NOTE...