Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
– Perform Elevation Calibration. • The wire is not connected on the motor circuit board. – Connect the elevation wire to the circuit board. • Motor drive does not respond properly. • It is not calibrated. – Perform Motor Check. • The wire is not connected on the motor circuit board. – Motor wiring harness needs to be connected to the lower board. • Motor turns backwards. • The wires are reversed on the circuit drive. – Contact your Bodyguard® Dealer. • Computer key(s) not responding to touch, or sticking. • Keypad may be damaged by liquid penetrating through the seal. – Contact your Bodyguard® Dealer. • Excessive amount of cleaning solution used. – Use mild cleanser on damp cloth only when cleaning console and unit. • Squeaking noise from the motor. • Poly V-belt slipping. – Contact your Bodyguard® Dealer. • Motor brush noise excessive. – Contact your Bodyguard® Dealer. • Belt tracks left and right. • Uneven floor. – Move the treadmill to an even floor. • Rear roller not adjusted for sloped floor. – The rear roller needs to be adjusted. Perform Belt Alignment. • Speed is not constant or seems too fast or slow. • The drive motor is not calibrated. – Perform Motor Check. • The tension on the motor drive is too excessive. – Remove tension on the running belt. Perform Belt Alignment. • Can’t get out at the end of a program. • Elevation is not calibrated. – Perform Elevation Calibration. • Error log • See table 4 31 Error Codes Table 4 PROBLEM CAUSE / SOLUTION • Error 1 • Acceleration is too quick in the acceleration or reached speed phase. • Possible causes: Motor drive defective or user pushing on the running belt for too long. • Error 2 • Running belt not following the speed required in the reached speed phase. • Possible causes: Deck too sticky. Walk on deck for 15 minutes at 4 mph. • Motor drive board can be defective. • Check speed sensor or optical disk. • Error 11 • Acceleration is too fast during acceleration phase. • Possible cause: Defective drive board. • Error 12 • Acceleration is too slow during acceleration phase. • Possible causes: Deck too sticky. • Walk on deck for 15 minutes at 4 mph. • Speed sensor problem. • Error 21 • In a deceleration phase, the speed slows too fast. • Possible cause: Drive board defective. • Error 22 • In a deceleration mode, the speed slow down too slowly. • Possible cause: Drive board defective, speed sensor problem. • Error 23 • There is an abnormal acceleration during the deceleration phase. • Motor drive board is defective. • Acceleration is too quick under 2 mph. • Error 31 • Possible causes: Motor drive defective or user pushing on the running belt for too long. • Elevation motor values from potentiometer are out of range. • Possible causes: Elevation motor is defective or uncalibrated. • Perform an elevation calibration in the diagnostics menu. • Motor drive board can be defective. • Elevation Motor Error • Elevation Motor not functionnal. • Elevation Motor not connected. 32 Thank You for Purchasing a Bodyguard® T360–T560 Bodyguard® Fitness is dedicated to designing and manufacturing the finest fitness equipment available today. This manual outlines information on warranty, assembly, operation of the unit, safety and basic maintenance checks for the Bodyguard® T360–T560 treadmills. When you require service for your T360–T560, always present the unit product model, serial number and date of purchase to the Bodyguard® Dealer. The product model and serial numbers are located at the front of the machine. Now is a good time to write the product model and serial numbers and related information in the space provided. Product Name Model Number Serial Number Date Purchased Dealer Store Name Dealer Phone Number Please fill out the warranty registration card and return it to Bodyguard® Fitness within 30 days of date of purchase for registration of your T360–T560 warranty. Your returned warranty registration card is important in helping us keep you upto- date with all the latest T360 – T560 product additions. Also, the warranty card is used to establish the actual sale date. NOTE – The warranty card is use to establish the beginning of the warranty of your treadmill. If you omit to send your warranty card to Bodyguard® Fitness, we will use the dealer purchase date to honor the warranty time. You can also register on-line at 33 Safety requirements North America The T360–T560 treadmills have been tested and approved to meet all ETL requirements concerning electrical and mechanical safety. In addition, the T360 –T560 treadmills conform to UL 1647 and CAN/CSA-E335-1/2E. International The equipment listed in this manual has been tested to meet the Low Voltage Directive 73/23/EEC concerning the electrical and mechanical safety. Interference limits requirements North America This equipment has been tested and found to comply with the limits of Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec...
Other models in this manual:Fitness Equipment - T560 (1.15 mb)