Votes - , Average rating:
(
)
)
Manafacture: ADIC
File size: 150.83 kb
File name: omFs2BarcodeReaderManual.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
The barcode becomes part of the information stored in the application software. Contents Page Topic 1 What’s in the Box? 1 Tools Required 2 Installing a Barcode Reader 5 Removing a Barcode Reader 6 Contacting ADIC What’s in the Box? The following items are included in your barcode reader kit. Description Quantity Barcode reader 1 Barcode label sheet 1 Tools Required The following tools are required to work with the barcode reader kit. Description Quantity A small flat blade screwdriver 1 © May 2005, ADIC® ADIC, Scalar, and SNC are registered trademarks of Advanced Digital Information Corporation. All other product, company, or service names mentioned herein are the property of their respective owners. 6-00518-02 Rev B Installing a Barcode Reader Use the following instructions to install the barcode reader to the rear of the autoloader unit. Use Figure 1 as a reference. Figure 1 Installing a Barcode Reader 1 Turn off your autoloader and remove the SCSI cable(s) from the rear panel, and then disconnect the power cord from the outlet. 2 The cover plate is on the rear panel of the autoloader. Using a flat blade screwdriver, remove the cover plate and store it in a secure locations for future use. Save the screws for Step 4. Store the cover plate in a secure location. 3 Align the barcode reader to the outlet and then attach the barcode reader cable to the barcode outlet. Be careful not to force the barcode reader into the outlet. If you try to install the barcode reader upside down, the cable connections will not match. 4 Using a flat blade screwdriver, attach the barcode reader to the rear panel of the autoloader using the screws from the cover plate. 5 Reconnect the SCSI cable(s) and the power cord to your autoloader. Applying Barcode Labels to Cartridges Before your barcode reader can operate, you must attach barcode labels to your data cartridges. If you insert cartridges that already have barcode labels, you must cycle the power on your autoloader. See the FastStor 2 User’s Guide for information on loading media into your autoloader. 2 FastStor 2 Installing or Removing a Barcode Reader All barcode labels are applied to the front of the cartridge. Depending on the media type, barcode labels are either stickers that are adhered to the front of the tape cartridge or cutouts that you slide into an indentation on the front of the cartridge. • Peel off the label and place it on the cartridge. Verify that label is oriented so the numbers appear right-side up and above the barcode. See Figure 2 and Figure 3. Figure 2 LTO Cartridge Barcode Placemen Be careful not to apply barcode labels upside down. 1\ CAUTION FastStor 2 Installing or Removing a Barcode Reader 3 Figure 3 Super DLTtape Cartridge Barcode Placement Configuring the Barcode Reader Your host system senses the presence of the barcode reader at power-up and enables the barcode read function. The application software can start scanning barcode labels as soon as the autoloader is powered-up. 4 FastStor 2 Installing or Removing a Barcode Reader Removing a Barcode Reader Use the following instructions to remove a barcode reader from your autoloader. Use Figure 4 as a reference. Figure 4 Removing a Barcode Reader 1 Turn off your autoloader, remove the SCSI cable(s) from the rear panel, and then disconnect the power cord from the outlet. 2 The barcode reader is installed on the rear of the autoloader. Using a flat blade screwdriver, unscrew the two screws that secure the barcode reader to the autoloader. 3 Unplug the barcode reader cord from the barcode outlet. 4 Replace the cover panel that you removed during installation (refer to Installing a Barcode Reader on page 2) to the back of the autoloader, using the screws that secured the barcode reader to the autoloader. The cover panel prevents dust and other foreign items from entering the autoloader. 5 Reconnect the SCSI cable(s) and the power cord to your autoloader. 6 Store the barcode reader in a cool dry place. FastStor 2 Installing or Removing a Barcode Reader 5 Contacting ADIC If problems cannot be solved with the aid of this document or if training is desired, contact the ADIC Technical Assistance Center (ATAC). In the USA: 800-827-3822 In Europe and Japan: 00-800-9999-3822 For other contact numbers: To open a Service Request online: 6 FastStor 2 Installing or Removing a Barcode Reader...