customer's e-mail us at: faucetsupport@amstd.com For Parts, Service, Warranty or other Assistance, please call 1-800-442-1902 (In Canada: 1-800-387-0369) NOTE TO INSTALLER: Please give this manual to the customer after installation. (In Toronto Area only: 1-905-3061093) Specifications Installation Adjust Temperature Service Replacement Parts 1 2 3 3 4 Installation InstructionsInstallation InstructionsSELECTRONIC™ Thermostatic Mixing Valve Certified to comply with ASME A112.18.1M © 2005 American

Non-abrasive liquid polishers Once clean, rinse faucet again with clear water to thoroughly remove cleaner or polish and blot dry with a soft cotton cloth. To keep your new faucet looking new, please follow these simple care instructions: DO: Simply rinse the faucet clean with clear water. Dry the faucet with a soft cotton cloth. DO NOT: Do not use any abrasive cleaners, cloths, or paper towels. Do not use any cleaning agents containing acids, polish abrasives, or harsh cleaners or soaps. Regula

If heavy cleaning is required, the following procedures are recommended: CARE INSTRUCTIONS: Failure to follow these care instructions may damage the Faucet's finish. FINISHED WALL CL 100 1 1 1 3 5 2 4 3 5 6 1 3 4 5 2 TEMPERATURE CALIBRATION SET HOT LIMIT STOP 5 Check that arrow marking B points vertically upwards. If not, push the BLACK CLAMP (1) on the SECURING RING (2) to the right, pull off KNOB MOUNT (3) and reinstall KNOB MOUNT (3) with arrow "B" pointing upwards. For 100 F adjustment, turn

Reduces the risk of accidental scalding. Maximum water temperature limit may be reduced to 104 or 109 degrees Fahrenheit. SUGGESTED SPECIFICATION: Central Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature 1/2" or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T373.73X._(Trim Kit) and R510 or R530 (Rough Valve). F25 © 2008 AS America Inc. T^tmncMi Shwda/rd ENFIELD Style That Works Better CENTRAL TH

This will increase the mixed water temperature up to the maximum limit previously selected in step 4. Push ESCUTCHEON HOLDER (3) with lightly greased O-RING SEAL (4) over CAP (1). 2 1 3 1 2 HANDLE INSTALLATION Push TEMPERATURE-CONTROL KNOB (1) with the red stop onto KNOB MOUNT (2). Push RING (3) onto TEMPERATURE-CONTROL KNOB (1) and attach with SCREW (4). Push VOLUME-CONTROL KNOB (6) onto HANDLE ADAPTER (8). Push RING (3) onto VOLUME-CONTROL KNOB (6) and and attach with SCREW (7). Press on KNOB

No. 12-5029-01 69-1617 TABLE OF CONTENTS CUSTOMIZING YOUR THERMOSTAT ............................................................................................................. 5 Program Options Set-Up by Your American Standard Dealer ....................................................................... 5-6 GETTING AROUND THE KEYBOARD ............................................................................................................. 7-8 Emergency Heat ..............................

BRASS (MIXAGE) 002 099 295 299 Replace the "YYY" with appropriate finish code CENTRAL THERMOSTAT LESS VOLUME CONTROL TRIM KIT T050110 T050120 HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1-800 442-1902 Weekdays 8:00 a.m. to 8:00 p.m. EST IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093) Weekdays 8:00 a.m. to 7:00 p.m. EST Product names listed herein are trademarks of American Standard Inc. © American Standard Inc. 2003 Installation Instructions R510 R530 ROUGH

LESS Valve. ROUGH VALVES: □ R510 Rough Valve Body only 1/2" NPT inlets/outlets. LESS Trim. □ R530 Rough Valve Body only 3/4" NPT inlets/outlets. LESS Trim. NOTE: • Requires separate on/off volume control. • When used as a Bath/Shower: EITHER - a separate diverter valve (such as R420 or R430) OR - a diverter tub spout (requires twin ell - Model #8888.120) IS REQUIRED GENERAL DESCRIPTION: Cast brass valve body. The single unit contains one handle, which sets the desired temperature.

LESS Valve. ROUGH VALVES: □ R510 Rough Valve Body only 1/2" NPT inlets/outlets. LESS Trim. □ R530 Rough Valve Body only 3/4" NPT inlets/outlets. LESS Trim. NOTE: • Requires separate on/off volume control. • When used as a Bath/Shower: EITHER - a separate diverter valve (such as R420 or R430) OR - a diverter tub spout (requires twin ell - Model #8888.120) IS REQUIRED Cast brass valve body. The single unit contains one handle, which sets the desired temperature. The temperature is mai

For 100 F adjustment, turn the water supply on. Turn KNOB MOUNT (3) until the spout temperature is 100 F. Check that arrow marking A on the KNOB MOUNT (3) still points upward after adjusting the thermostat to 100 F. If not, pull out the RED LOCKING DEVICE (5). Remove KNOB MOUNT (3) without turning by sliding out as indicated by the arrow. Reinstall the KNOB MOUNT (3) so that the arrow marking A points upwards. The maximum mixed water temperature is set at 109 F at the factory. This setting can b