Votes - 2, Average rating: 4.5 ( )

Manafacture: Carrier File size: 228 kb File name: 33cs-20so.pdf Language of manual:

Follow all local electrical codes during installation. All wiringmust conform to local and national electrical codes. Improperwiring or installation may damage thermostat. Recognize safety information. This is the safety alert symbol . When the safety alert symbol is present on equipmentor in the instruction manual, be alert to the potential for personal injury. Understand the signal words DANGER, WARNING, andCAUTION. These words are used with the safety alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies a hazard which could result in personal injury or death. CAUTIONis used to identify unsafe practices which would result in minorpersonal injury or property damage. GENERAL The Edge Pro thermostat by Carrier is a wall-mounted, low- voltage control which combines temperature and humiditycontrol in either a single or two-piece unit. The Edge Pro thermostat can be set for 7-day, 5/2-day, or 1-day programmableoperation. Different heating and cooling set points and timesare programmable for 2 or 4 periods per day. The thermostatcan also be configured for non-programmable operation. Whenoperating as a non-programmable thermostat, the user will stillhave both temperature and humidity control. The Edge Pro thermostat has no need for batteries to storeuser-configured settings in memory. During power loss its internal memory saves settings for unlimited time, and the clockcontinues to run for at least 24 hours. An extension of Carrier’s proven line of thermostats, the Edge Pro thermostat providesseparate set points for heating and cooling in addition to humidification and dehumidification. OPERATION Thermostat Display — The thermostat display is located in the center of the thermostat. See Fig. 1. The followinginformation can be displayed on the screen: • day of the week • programming option (indicates which settings are beingadjusted) • filter and UV lamp service reminders • current temperature • current program routine (follow scheduled programming, hold current settings, or run holiday program) • fan mode (on, auto) • current system mode (heating, cooling, emergency heat, heat/cool (auto), off) • humidify or dehumidify settings • Fahrenheit or Celsius display • advanced programming indicators • keypad locked or unlocked • programming option (indicates which settings are beingadjusted) • system is in auxiliary (supplemental) mode • cooling set point • heating set point • year • holiday schedule return date •day • length of time for temporary temperature hold (override) • month • outdoor temperature • leaving air temperature • time period start • period of the day Thermostat Front Panel Buttons — The thermostat has buttons under the front cover which are used for various functions such as raising or lowering the desired set pointand changing the current mode. See Fig. 2. SET BUTTON — This button enters the thermostat programming schedule and allows the user to adjust the clock andchange the calendar. SCHEDULE BUTTON — This button allows the user to choose to follow a schedule, hold the current set points, or gointo holiday mode. OCCUPIED BUTTON — This button temporarily changes the thermostat from Unoccupied to Occupied settings. MODE BUTTON — This button selects whether the thermostat is set for heating, cooling, emergency heat, auto (heat andcool as needed), or off modes. DONE BUTTON — This button saves the settings whencompleting a setup or programming step. holiday holiday occ unocc occ3occ2 aFig. 1 — Thermostat Display Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations. Catalog No. 04-53330011-01 Printed in U.S.A. Form 33CS-20SO Pg 1 7-08 Replaces: New soft keys occupied holiday holiday occ unocc occ3occ2 aFig. 2 — Thermostat Front Panel Buttons soft keys occupied holiday holiday occ unocc occ3occ2 aFig. 2 — Thermostat Front Panel Buttons UP BUTTON — This button is used to increment the current ly chosen value (temperature, clock, calendar, etc.). DOWN BUTTON — This button is used to decrement the currently chosen value (temperature, clock, calendar, etc.). “SOFT” BUTTON — There are 6 soft buttons (or keys). Thesoft buttons are used to select the onscreen indicator directlyabove that specific button. These indicators can change basedon the actions of the user. Set Time and Date — The user must set the time and date before the thermostat’s programming features can be used. Perform the following procedure: 1. Open the thermostat front panel door. 2. Press the set button. The screen will show the word “clock” on the left of the display and the time will beshown on the bottom. Press the set button again. 3. To set the correct hour, press the soft button underneaththe hour indicator, and then press the up or down buttonsto adjust the value. 4. To set the correct minutes, press the soft button underneath the minutes indicator, and then press the up...

Download now

Please, enter two numbers from picture: