
The following parts will be used when installed properly: Two Bead ConDector, Bead Cb~D, Bead CbaiD CoDnector, and Bead CbaiD CoDDector Cover. (Figure 16) 3. Remove clip or pin which retains throttle cable (and washer if provided) and install Two Bead Connector on the same side of throttle cable as the Cable Assembly will be anchored. This is necessary so that Cable Asaeinbly and throttle cable will not cross. 4. The Two Bead may need to be bent so that it clears the throttle cable. (Figure 17)