Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Important Safeguards and Precautions
READ AND RETAIN ALL SAFETY AND
OUTDOOR ANTENNA INSTALLATION
OPERATING INSTRUCTIONS. HEED ALL
1 SAFE ANTENNA AND CABLE CONNECTION
WARNINGS IN THE MANUAL AND ON UNIT
An outside antenna or cable system must be properly
grounded to provide some protection
INSTALLATION
ANTENNA
LEAD IN
against built up static charges
WIRE
1 POWER SOURCE CAUTION
GROUND
and voltage. Section 810
CLAMP
of the National Electrical Code,
Operate only from power source indicated on unit
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ANSI/NFPA 70 (in Canada,
or in this manual. If uncertain, have your Electric
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
(NEC SECTION 810-21)
part 1 of the Canadian Electrical
Utility Service Company or Video Products Dealer
GROUND CLAMPS
verify your home power source.
Code) provides information
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
regarding proper grounding of
2 POWER CORD PLUG
the mast and supporting structure, grounding of the lead-in wire
For safety, this unit has a polarized type plug (one wide
to an antenna discharge unit, size of grounding conductors,
blade), or a three-wire grounding type plug. Always
location of antenna discharge unit, connection to grounding
hold the plug firmly and make sure your hands are
electrodes, and requirements for the grounding electrode.
dry when plugging in or unplugging the AC power cord.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
Regularly remove dust, dirt, etc. on the plug.
POWER LINES OR CIRCUITS
POLARIZED PLUG CAUTION:
Locate an outside antenna system well away from power
The plug fits into outlet only one way. If it cannot be
lines and electric light or power circuits so it will never touch
fully inserted, try reversing it. If it still will not fit, have
these power sources should it ever fall. When installing
an electrician install the proper wall outlet. Do not
antenna, absolutely never touch power lines, circuits or
tamper with the plug.
other power sources as this could be fatal.
GROUNDING PLUG CAUTION:
The plug requires a three-hole grounding outlet.
USING THE UNIT
If necessary, have an electrician install the proper
Before unit is brought out of storage or moved to a new location,
outlet. Do not tamper with the plug.
refer again to the INSTALLATION section of these safeguards.
3 POWER CORD
1 KEEP UNIT WELL AWAY FROM WATER OR
To avoid unit malfunction, and to protect against
MOISTURE, such as vases, sinks, tubs, etc.
electrical shock, fire or personal injury:
2 IF EXPOSED TO RAIN, MOISTURE, OR
- Keep power cord away from heating appliances
STRONG IMPACT, unplug unit and have it inspected by
and walking traffic. Do not rest heavy objects on,
a qualified service technician before use.
or roll such objects over the power cord.
3 ELECTRICAL STORMS
- Do not tamper with the cord in any way.
During a lightning storm, or before leaving unit unused for
- An extension cord should have the same type
extended periods of time, disconnect all equipment from the
plug (polarized or grounding) and must be securely
power source as well as the antenna and cable system.
connected.
4 WHEN UNIT IS PLUGGED IN
- Overloaded wall outlets or extension cords are
fire hazards.
• DO NOT OPERATE IF:
- Frayed cords, damaged plugs, and damaged or
- liquid has spilled into unit.
cracked wire insulation are hazardous and should
- unit was dropped or otherwise damaged.
be replaced by a qualified electrician.
- unit emits smoke, odours, or noises.
Immediately unplug unit, and have it inspected by a service
4 DO NOT BLOCK VENTILATION HOLES
technician to avoid potential fire and shock hazards.
Ventilation openings in the cabinet release heat
• Never drop or push any object through openings in unit.
generated during operation. If blocked, heat
Touching internal parts may cause electric shock or fire hazard.
build-up may result in a fire hazard or heat
Do not put any foreign object on the tray.
damage to discs.
• Keep magnetic objects, such as speakers, away from
For your protection:
unit to avoid electrical interference.
a. Never cover ventilation slots while unit is ON,
5 USING ACCESSORIES
or operate unit while placed on a bed, sofa,
Use only accessories recommended by the manufacturer to
rug, or other soft surface.
avoid risk of fire, shock, or other hazards.
b. Avoid built-in installation, such as a book case
or rack, unless properly ventilated.
6 CLEANING UNIT
Unplug unit. Use a clean, dry, chemically untreated cloth to
5 AVOID EXTREMELY HOT LOCATIONS OR
gently remove dust or debris. DO NOT USE cleaning fluids,
SUDDEN TEMPERATURE CHANGES
aerosols, or forced air that could over-spray, or seep into unit and
Do not place unit over or near a heater or radiator, in
cause electrical shock. Any substance, such as wax, adhesive
direct sunlight, inside closed vehicles,
tape, etc. may mar the cabinet surface. Exposure to greasy,
in high temperature [over 95 °F (35 °C)], or in over
humid, or dusty areas may adversely affect internal parts.
75% humidity. If unit is suddenly moved from a
cold place to a warm one, moisture may condense in
SERVICE
unit and on the tape causing damage. Never subject
1 DO NOT SERVICE PRODUCT YOURSELF
unit to vibration, impact, or place it so that the
If, after carefully following detailed operating instructions, the
surface is tilted as internal parts may be seriously
unit does not operate properly, do not attempt to open or remove
damaged.
covers, or make any adjustments not described in the manual.
6 TO AVOID PERSONAL INJURY
Unplug unit and contact a qualified service technician.
• Never place unit on support or stand that is not
2 REPLACEMENT OF PARTS
firm, level, and adequately strong. The unit could
Make sure the service technician uses only parts specified
fall causing serious injury to a child
by the manufacturer, or have equal safety characteristics
or adult and damage to the unit.
as original parts. The use of unauthorized substitutes may
• Move any appliance and cart
result in fire, electric shock, or other hazards.
combination with care.
3 SAFETY CHECK AFTER SERVICING
Quick stops, excessive force, and
After unit is serviced or repaired, request that a thorough safety
uneven surfaces may cause objects to overturn.
check be done as described in the manufacturer’s service
• Carefully follow all operating instructions.
literature to ensure video unit is in safe operating condition.
2
For assistance, please call : 1-800-211-PANA(7262) or send e-mail : consumerproducts@panasonic.com
20_25_27D52 (P02-3).p65
2
2002/04/16, 13:30
...Other models in this manual:
Televisions - PV25D52 (2.12 mb)
Televisions - PV27D52 (2.12 mb)