Votes - 1, Average rating: 3
(
)
)
|
manual abstract
Notes: • Refer to your amplifier’s manual for more information. • You can use AUDIO OUTPUT for your home theater system. 14 Step 3 – The Interactive Plug In Menu Quick Setup Plug-In Menu Step 3 – The Interactive Plug In Menu Quick Setup Plug-In Menu When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear. • Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clock. • The auto tuner setup of which channels you wish to receive. We recommend you complete the interactive plug-in items before you start using your television. Language After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your onscreen menus in three languages: English, French (Francais) or Spanish (Espanol). INTERACTIVE PLUG IN MENU> LANGUAGE/LANGUE/IDIOMA ENGLISH NEXT SELECT BY OPERATE BY EXIT BY EXIT v® To choose a language: (English, Francais or Espanol) † To NEXT (To set clock) (To be continued...) 15 Quick Setup Plug-In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal: INTERACTIVE PLUG IN MENU> SET CLOCK MODE TIME AUTO NEXT SELECT BY OPERATE BY EXIT BY EXIT TIME ZONE D.S.T. PACIFIC OFF ––:–– –– v® To choose AUTO † To TIME ZONE v® To select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) † To move to D.S.T. (Daylight Savings Time) v® To turn D.S.T. ON or OFF † To NEXT (To Auto Tuner Setup) Notes: • D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu. • Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October. • You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions. Manual Clock Set To set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. INTERACTIVE PLUG IN MENU> SET CLOCK START CLOCK SELECT BY OPERATE BY EXIT BY EXIT MODE TIME MANUAL TIME ZONE D.S.T. PACIFIC OFF ––:–– –– v® To choose MANUAL † To TIME v® To set the hour † To minute v® To set the minute † To START CLOCK Note: • You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions. 16 (To be continued...) Quick Setup Plug-In Menu Auto Tuner Setup In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels. INTERACTIVE PLUG IN MENU> AUTO TUNER SETUP START SELECT BY OPERATE BY EXIT BY TUNER MODE CABLE EXIT v® To choose CABLE or AIR (or SKIP when you skip Auto Tuner Setup) † To START NOW PROGRAMMING ! 48 Programming will take approximately 1 to 2 minutes. When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience. Notes: • Noise muting will not work during Auto Tuner Setup. • Skip appears only for interactive plug-in menu. • The interactive plug-in menu setting does not appear if your TV has been turned on before. In this case, use the initial setup menu to perform these settings. See pages 32, 38 and 24. Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal. STOP The Quick Setup is complete 17 Remote Programming Setting the CATV, VCR and DVD CodesRemote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key operation. 1) Find the...