Votes - , Average rating: ( )

User manual Premier Mounts, model INW-42

Manafacture: Premier Mounts
File size: 298.88 kb
File name: e77847da-2081-453f-9e47-4ed95c81a0cc.pdf

Language of manual:

The document is loading, please wait

Download nowClose

The document is loading, please wait

Download nowClose

Anaheim, CA 92806 Phone: 800 368-9700 Fax: 800 832-4888 PREMIER MOUNTS ©2004/ REV 00 The wall structure should be capable of supporting a weight of at least five (5) times the display’s weight. If it cannot the wall must be reinforced. Proper installation procedure by qualified personnel as outlined in the installations instructions must be adhered to. Failure to do so could result in serious personal injury. WARNING: Safety precaution measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installation procedure to prevent personal injury. The entire installation instructions should be fully read and understood, including all of the safety symbols and safety precautions, before beginning installation. The installation instructions should be read, understood and followed to prevent personal injury or property damage. Keep these installation instructions in an easily accessible location for future reference. Do not install in locations where there is vibration, movement or danger of impact. Failure to do so could result in display cracking or falling from the wall causing damage and injury. Do not install near heater, fireplace, direct sunlight or air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the display and could cause a risk of fire. At least two qualified people should always perform the installation work. Injury and damage can result from dropping or mishandling the display. A secured structure wooden stud wall must always support the weight or load of the display. Always confirm the wood stud before beginning the installation. Indicates that the power plug is to be disconnected from the power outlet. Contact Premier Mounts for any questions Safety precautions must be taken at all times. Warning and caution in general - 2 - - 3 - Assembly drawing Wall structure Wood stud frame Mounting Bracket (Sold separately) Display (not supplied) Decorative bezel provided by customer Fan brackets (1 supplied with inwall) In-wall plenum box Air flow - 4 - Parts list All of these parts are used to install the mounting bracket. Make sure that none of these parts are missing before beginning installation. If there are parts missing stop the installation and contact Premier Mounts. INW42 Plenum INW50 Plenum INW60 Plenum (4) 6/32” Hex nuts (3) 10/32” Kep nuts (4) 6/32” Phillips screws (1) Muffin fan (1) Muffin fan bracket Opening the wall structure Opening the wall structure NOTE: It is assumed that the room ambient air temperature and conditions where the INW-series is to be incorporated is suitable to maintain an acceptable operating temperature for the display. It should also be noted that due to the shear size and weight of the large screen display when attached to the base pan it will have a natural slight down tilt characteristic to about 3°. Raising the initial installation height of the pan or setting the base pan on a s...