Votes - 4, Average rating: 4
(
)
)
|
manual abstract
The mode selection made will effect the speed and/or saturation and/or intensity which determines the viewing impression. E.g. in Relaxed mode, the rate of brightness and colour change is smoothly and soft which gives you a more immersive yet relaxed viewing. Ambience is the rate of brightness and colour change as predefined in the factory. Movie will influence the perception of a movie whereas Action mode will influence the dynamic impression. Notes: -The rate of change is limited, as not to cause uncomfortable sensations. -According to the selection made, some Ambilight menu items will be downlighted and can not be selected. § In case Colour has been selected in the Mode menu: • Select Colour in the Ambilight menu and press the cursor right. • Select Smart colour and then select Personal, Warm white, Cool white or Blue. • Select Palette to select the general colour of the light output. • Select Saturation to adjust the colourfulness of the light. Notes: -Adjusting the Palette and/or Saturation settings will set the colour mode to Personal. -The selected colour mode will be the one used when turning on the ambient lights from standby mode. e In case Ambience, Relaxed, Movie or Action has been selected in the Mode menu: • Select Separation in the Ambilight menu and press the cursor right. • Select Off for a mono behaviour which means that all lamps will behave equally. • Select Minimum, Medium or Maximum to define the Ambilight stereo effect over the available lamps. ! Select Balance and use the cursor left/right to adjust and generate any colour and level of light intensity on the left and right side of the picture to perfectly match your room setup. Ambilight in Standby mode When the TV is switched off, the ambient lights will also be switched off. When the TV is in standby mode, ambilight can be used to provide a unique ambience for the room. Press the AMBILIGHT ON/OFF key on the remote control (see p. 4) to switch between Ambilight Off or On. Note: Infrared interference To avoid bad infrared remote control reception, place your peripheral equipments out of sight of the ambient lights of your TV. Note: Ambilight does not function well when the room temperature is less than 59°F/15°C. (button) (button) (button) (button) (button) (button) (button) (button) Multimedia Browser Multimedia Browser Television Multimedia TV channels USBDevice Memory Card The Multimedia browser lets you display pictures, audio or movies or play audio files stored on a USB device or a memory card. The Multimedia browser application is invoked from the Browse menu (press the = key) by selecting a device and pressing the cursor right. Notes: -Following types of memory cards can be read: Compact Flash I & II, Memory stick, Memory stick PRO, SD Card/Mini SD Card, Smart Media, Micro Drive, MultiMedia Card. -Following file formats can be reproduced: • For pictures: JPEG • For audio: MP3, MP3 Pro • For video: MPEG1, MPEG2, MPEG4, DIVX and XVID files -Only FAT/DOS-formatted memory devices are supported. -If your digital camera is not supported, try one of the following solutions: •Make sure your camera is switched on and verify if its configuration settings are correct (see the manual of your camera). •Remove the memory card from your camera and insert it in the memory card slot. Refer to for more information. -Philips cannot be responsible if your USB device or memory card is not supported. CF Compact Flash I & II / Micro Drive Memory Stick MultiMedia Card / SD Card Smart Media Card Viewing content from a Memory card / USB device Inserting a memory card / USB device Note:Memory cards or USB devices are not supplied with this TV. Insert a memory card in one of the cardslots at the right side of the TV. Insert it to be clicked in. In case of a memory stick or a digital camera, connect it to one of the USB2.0 connectors. When a memory card or a USB device is inserted, the Multimedia menu is displayed automatically, see further. Removing the memory card / USB device & First switch off the Browse menu.To do so, press the = key on the remote control. e Remove the memory card/USB device. Card data protection • Do not remove the card/USB device when the content is being read or when browsing. Such action may damage the memory card/USB device. • Do not touch the terminals on the back of the card. •Always insert a card in the correct direction. Failure to do so may result in damage to the card and the unit. • Do not subject the card to excessive pressure or strong impacts. • Malfunctions of the unit or card may result in data loss or damage to the card. • Philips shall not accept any liability for damage or loss of stored data. Warning: Memory cards can be swallowed by young children. Do not allow children to handle memory cards. Please, remove the memory card immediately after use. (button) (button) (button) (button) (button) (button) (button) (button) Multimedia Browser menu Picture London2005 The Beatles Xmas2004.alb arn...