Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
In this case, holding the lock lever . toward the left, lift the forehead supporter and push the supporter forward. Tighten the headband securely. Tip .The length of the top and bottom headband straps can be adjusted. For details, see the “Reference Guide.” Wear the headphones. Wear the earpiece marked R in your right ear and the one marked L in your left ear. For a Comfortable Fit . Support the unit with your forehead and at two positions on the back of your head. . Do not rest on your nose. . Adjust the unit so that the screens are in front of your eyes. If you normally wear glasses or contact lenses, wear them as usual during use (with the exception of reading glasses). Note that watching with bifocals may be less than optimal. To remove the head mounted unit .Remove the headphones from your ears before taking off the head mounted unit. .Hold the band release buttons on both sides and pull the unit forward as you lift it off. Eye Screen Pull out the headband. On one side after another, hold the band release button down and pull out the headband. Put the head mounted unit on your head. Lower the bottom headband strap to the base of your head. 3 Set Up Follow the instructions displayed on the screen for operations. Select a display language (first time only). Press the ./. button to select a language, and then press the MENU or . button. Adjust the lens span. Slide each lens span adjuster until you can see both screens clearly. After adjustment, press the MENU button or . button. 4 Enjoy For details on configuring menu settings and attaching accessories, see the “Reference Guide.” Note .To resolve a lack of audio, video, or 3D playback when the system is connected to a PlayStation®3 (PS3™), see the instructions on the page to the right of the cover for troubleshooting. Control playback from compatible playback sources. Controlling Playback from the Unit Notes .The system cannot be used for advanced playback equipment control, such as menu operations. .Control using these buttons is only possible when the “Control for HDMI” in “General Setup” is set to “On” (default setting). .Some playback equipment cannot be controlled using the head mounted unit buttons. Volume Fast-rewind Hold the button down to jump to the previous chapter. Power on/ standby Hold the button down to enter standby mode. Fast-forward Hold the button down to jump to the next chapter. Play Pause All three “I” marks and the horizontal line intersect. Tips . If you cannot see the screen clearly after lens span adjustment, start over from “2 Wear.” . If adjustment is difficult, try sliding both adjusters to the center position before adjustment. Check display alignment. Confirm that all three “I” marks and the horizontal line intersect, and then press the MENU or . button. It is acceptable if the “I” marks and the horizontal line intersect in a position other than the center of the screen. Note . If even one o...