Login:
Votes - 0, Average rating: 0 ( )

User manual Toshiba, model TD-Z471

Manafacture: Toshiba
File size: 13.28 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


It is recommended to check the operation in advance. • The image transfer function via the LAN isn’t supported. This monitor isn’t equipped with the host function for controlling other devices. Connecting LAN Connecting a USB device Connecting multiple USB devices using the USB hub function The USB hub of this monitor is equipped with two switchable upstream ports. One is for connecting an external computer, and the other is for connecting an OPS-compliant computer internally. Only the selected upstream port is connected to the USB hub. Use the OSD screen function to select the appropriate upstream port. See pages 46 and 62. 1 [When using an external computer] Connect the USB port (Standard A) on the computer and the USB upstream port (Standard B) on the monitor using a USB cable (commercially available). [When using an OPS-compliant computer] Install an OPS-compliant computer (connected internally). 2 Connect a USB device to the downstream port of this monitor. USB devices(mouse, touch panel, etc.) Internal structure of the monitor’s USB functionSwitchUpstream portDownstream portInternal hubWhen using an external computerWhen using an OPS-compliant computer USB (Sample Illustration) 42” • The USB hub function cannot control the monitor. • Up to 5 hubs can be cascaded in the hub function of this monitor. Carry out operation check in advance even if you connect a device pursuant to the USB standards. Connecting a USB device Connecting the power cord to the monitor Connecting the power source Before making connections • Check that the main power switch is off. When an OPS-compliant computer is installed and the main power switch of the monitor is on, connecting the power source may cause the computer to power on, causing damage or breakdown of the operation system and the hard disc. • The power outlet socket should be installed as near the equipment as possible and should be easily accessible. Please refer to “Important Safety Instructions” and “Installation, Ergonomics, Care, and Service” in this manual for proper selection of the AC power cord. Use the clamper to prevent accidental disconnection of the power cord. 1 Insert the power connector of the power cord fully and firmly into the AC IN connector of the monitor. 2 Secure the power connector using the cable holder (accessory). Don’t insert the cable holder into the power outlet socket. Doing so may cause electric shock. 1) Fit both ends of the cable holder to the monitor. 2) Rotate the cable holder and hook it to the power cord. 3) Secure the power connector with the cable holder. Main power switchCable holder (accessory) Power connector 3 Secure the power cord using the clamper (accessory). 4 Insert the power plug into the power outlet socket. • Fully insert the prongs into the power outlet socket. Loose connection may cause noise. • Don’t plug and unplug the power cord repeatedly in a short time of period. Power cord (For EU) Power cord (For North America) Clamper (accessory) Connecting the power cord to the monitor 34 Chapter 3 How to Use Turning on all the connected devices 1 Turn on the connected devices such as the computer and DVD player. Turning on the monitor When an OPS-compliant computer is installed as an expansion module, the computer automatically turns on and starts as the monitor is turned on. Don’t turn off the monitor immediately after turning it on because the computer may be in the startup process. Select OPTION as the video input and wait for the operating system of the computer to complete the startup process. When the computer doesn’t start within a given period of time (approx. 1 minute), “OPERATION ERROR” and an error message are displayed. See the user’s manual of your computer. 2 Turn on the Main Power Switch. The power indicator turns on green and the monitor turns on. The control buttons on the rear, wireless remote control, and schedule setting don’t work while the main power switch is off (the power indicator is off). When using them, check that the Main Power Switch is on (the power indicator is on). Main power switch (Sample Illustration) 42” Power switch 3 When the power indicator glows red, press the POWER button on the monitor. The power indicator turns green. 35 How to Use Power buttonorWireless remote control Power button Within 2 seconds after turning off the power by the POWER button on the wireless remote control or the monitor or by a communication command, don’t turn off the main power switch, don’t disconnect the power cord, and don’t turn off the breaker. If the AC power is turned off immediately after the power-off operation, all the OSD settings including the language selection may be reset to the factory defaults at the next power-on. If the OSD settings are reset to the factory defaults as described above, reconfigure the OSD settings using the following procedure. 1. Turn off the power of the monitor using the wireless remote control or otherwise. 2. Wait for at least 2 seconds. 3. Turn on the power of t...

Other models in this manual:
Televisions - TD-Z471E (13.28 mb)
Televisions - TD-Z471U (13.28 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category