Votes - 5, Average rating: 4.4
(
)
)
|
manual abstract
CHILD LOCK This function only allows the TV to be turned on using the remote control. Once the user has set this CHILD LOCK to ON, it will remain in this condition until the user changes it again. WAKE UP It is necessary to have set the clock (either manually or automatically) in order to be able to use this function. If the clock is not set (--:-- is shown) then the WAKE TIME and WAKE PROG. will not be selectable. The default setting for WAKE TIME is in the “OFF” position. After each use (the TV turns on according to the previous setting) the WAKE TIME will be returned to the “OFF” position, conserving always the last time setting entered ready for re-use. CLOCK SETTING The TV will automatically attempt to set the clock when powered on (with the MAIN POWER button). It takes as reference information embedded in the teletext signal of the channel defined by CLOCK PROG. Therefore, automatic clock setting is only possible if teletext is available on this channel. If no time is captured automatically (the clock will show - - : - -), then the TV will try again to set the clock whenever turning on from standby mode. Alternatively, the user can enter the time manually using the CLOCK function. However, if this is done the clock will not be periodically updated as would happen if the time is set automatically. We recommend that the user choose (if available) a CLOCK PROG which allows the time to be updated automatically. DEFAULT ZOOM CONTROL If the ZOOM control is set to AUTO (A15, see page 19 and 25, FORMAT SELECTION), then the picture format presented is controlled by the received picture format signalling data embed- GB19Daily Use Format Selection AUTO setting : If picture format signalling data is received, then the most appropriate ZOOM format will be automatically selected. In the absence of this data, the default ZOOM format will be selected (see page 25, ZOOM AUTO function under FEATURES MENU). Otherwise, the preferred mode of the user can be forced by repeated pressing of the remote control ZOOM button (A15): Television Format The following picture formats are available: AUTO WIDE ZOOM FULL SCREEN WATERGLASS AUTO (DLP-20J1, DLP-20D7) AUTO 4:3 FULL SCREEN ZOOM 14:9 TITLE-IN 14:9 ZOOM 16:9 TITLE-IN 16:9 AUTO (DLP-20W2) Remark:If HD source is received, picture format will automatically set to AUTO.(above various picture formats are not available) Menus Language Selection, Child Lock, Clock Setting, Wake Up, Noise Reduction These functions are available in the Features menu (see description page 25). CHILD LOCK This function only allows the TV to be turned on using the remote control. Once the user has set this CHILD LOCK to ON, it will remain in this condition until the user changes it again. WAKE UP It is necessary to have set the clock (either manually or automatically) in order to be able to use this function. If the clock is not set (--:-- is shown) then the WAKE TIME and WAKE PROG. will not be selectable. The default setting for WAKE TIME is in the “OFF” position. After each use (the TV turns on according to the previous setting) the WAKE TIME will be returned to the “OFF” position, conserving always the last time setting entered ready for re-use. CLOCK SETTING The TV will automatically attempt to set the clock when powered on (with the MAIN POWER button). It takes as reference information embedded in the teletext signal of the channel defined by CLOCK PROG. Therefore, automatic clock setting is only possible if teletext is available on this channel. If no time is captured automatically (the clock will show - - : - -), then the TV will try again to set the clock whenever turning on from standby mode. Alternatively, the user can enter the time manually using the CLOCK function. However, if this is done the clock will not be periodically updated as would happen if the time is set automatically. We recommend that the user choose (if available) a CLOCK PROG which allows the time to be updated automatically. DEFAULT ZOOM CONTROL If the ZOOM control is set to AUTO (A15, see page 19 and 25, FORMAT SELECTION), then the picture format presented is controlled by the received picture format signalling data embed- GB MAIN MENU PICTURE SOUND INSTALL FEATURES Position Access Exit 20 ded in the transmission. In the absence of this signalling data (as can often be the case) a default format must be used. This default format can be selected by the ZOOM AUTO function. LANGUAGE This can be changed at any time by the user in the LANGUAGE menu (accessed via the FEATURES menu). Main Menu All menus are removed within 60 seconds if you don t press any button. Press the remote control MENU button (A19) to display the main menu. Then, you have the choice between several sub-menus: If you want to Exit the main menu, press the MENU button (A19) a second time. - To select one of the sub-menus, use the remote control CURSOR UP (A6), DOWN (A21) buttons. - To enter the selected sub-menu, press the remote control OK button (A18). Remark...
Other models in this manual:Televisions - DLP-20D7 (4.73 mb)
Televisions - DLP-20W2 (4.73 mb)