Votes - 4, Average rating: 3.3
(
)
)
|
manual abstract
G [VIEW] PG [VIEW] PG–13 [VIEW] B R [BLOCK] NC–17 [BLOCK] X [BLOCK] Then, press the F.FWD/B button to select [BLOCK] or [VIEW]. Selection Rating Category Explanations G General Audience PG Parental Guidance suggested. PG-13 Unsuitable for children under 13 R Restricted; under 17 requires accompanying parent or adult guardian NC-17 No one under 17 admitted X Mature audience only • When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. • When you turn “G” to [VIEW], then all ratings will turn to [VIEW] automatically. 4 Exit the V-Chip setting mode Press the MENU button on the remote control to return to original mode. - 16-EN 9I03 FM MODE This function enables you to receive FM radio broadcasting. 1 Set the FM mode Press the TV/FM button on the remote control. The radio frequency FM 88.0 MHz appears on the TV screen. 2 Select the radio frequency you want to receive Press the CHANNEL K or L button until your desired radio frequency appears. NOTES: • The radio frequency indication repeats to appear and disappear. • You can not record the FM radio wave broadcasting. • If you receive a weak radio signal, you may change the FM Antenna mode to INT(internal) or EXT(external) by following the step below. 1)Press the MENU button. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button. 2)Press the PLAY/K or STOP/L button to point to “FM ANTENNA”. Select [INT] or [EXT] using the F.FWD/B or REW/s button. PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on. Window WRONG CORRECT PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically. 2 To begin playback Press the PLAY button. PLAY B Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu, then press the PLAY button. 3 To stop playback Press the STOP button when playback is completed. - 17-EN 9I03 SEARCHAUTO REPEAT PLAYBACK AUTO REPEAT PLAYBACK The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part of more than 10 seconds. 1 Select “USER’S SET UP” – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK Press the MENU button on the CHANNEL SET UP B USER’S SET UP V-CHIP SET UP remote control. LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN Press the PLAY/K or STOP/L but ton to point to “USER’S SET UP”. TIME SEARCH INDEX SEARCH Then, press the F.FWD/B button. 2 Select “ALL” or “BLANK” – USER’S SET UP – Press the PLAY/K or STOP/L but ton to point to “REPEAT PLAY”. RENTAL B REPEAT PLAY [OFF] [ALL] Press the F.FWD/B or REW/s AUTO RETURN button repeatedly until your desired selection [ALL] or [BLANK] appears. 3 Exit the Repeat Play setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears. • Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR. • If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority. TO CANCEL THE REPEAT PLAY MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the TV/VCR will now search in super high speed (in the LP / SLP modes only). NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is ...