Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Televisions - 50PN6506 (20.25 mb)
Televisions - 50PN6506 (3.62 mb)
Televisions - 50PN6506 (4.81 mb)
manual abstract
. If Input Source is not connected properly, programme registration may not work. . Auto Tuning only finds programmes that are currently broadcasting. . If Lock System is turned on, a pop-up window will appear asking for password. . Cable DTV Setting option When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as “default”. • Frequency : Enter a user-defined frequency. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). • Network ID : Unique identifier allocated for each user. • Start Frequency : Enter a user-defined start frequency range. • End Frequency : Enter a user-defined end frequency range. . Satellite Setting Option • Satellite : Select your desired Satellite. • LNB Frequency : Select one value from 9750/10600, 9750/10750, 9750, 10600,10750, 5150. If you select 9750/10600, 9750/10750(MHz), 22KHz Tone is disabled. If you cannot find the LNB frequency value from the list, select User and manually enter the frequency. • Transponder : Select the transponder you want to tune. • 22KHz Tone : When using 22KHz Tone switch, select A or B. If you use 22KHz Tone, Unicable and Motor Type are disabled. • LNB Power : To enable the power supply for the LNB, select On. If you select Off, Motor Type is disabled. • DiSEqC : When using DiSEqC, select one option from A~D/ToneA~B. If you use DiSEqC, Unicable and Motor Type are disabled. • Unicable Settings : Select On to use Unicable and set the Unicable in the Unicable Setting menu. When Unicable is enabled, 22KHz Tone, DiSEqC, Motor Type are disabled. • Motor Type : Select Motor Type to use Motor and set the Motor in the Motor Setting menu. When Motor is enabled, 22KHz Tone, DiSEqC, Unicable are disabled. . If you set satellite to others, you must add a transponder using Manual Tuning. . When selecting 22KHz Tone and DiSEqc, you must connect them in the same position as displayed on the OSD. . If you delete a Satellite, all programmes stored in the Satellite are deleted. . Motor Setting Option • DiSEqC 1.2 : Control motor to change satellite dish position. Drive Direction : Select the direction in which you want to move the motor. Drive Mode : Two modes are available: Step and Continuous. - Step: The motor moves based on the value you enter (from 1 to 128). - Continuous: The motor moves continuously until you press the Stop. Test TP : Select the test TP you want to tune. Set Limit : Set the motor movement to east or west to have the motor move only within the direction set. -On: You can limit the movement to the current direction by selecting the West/East. -Off: You can cancel the limit you set. Go To Zero: You can move the motor to Zero Store: You can save the motor’s current direction. • USALS : Set your current location(Longitude/Latitude). . Cable DTV Setting SETTINGS . SETUP . Cable DTV Setting [In Cable, Cable & Satellite mode only] When Channel Auto Update is On, you can update information for all the programmes that can be updated, including the programme currently being watched. When Channel Auto Update is Off, you can only update information for the programme currently being watched. . The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country. . If number of supported Service Operator for each country is 1, corresponding function becomes inactive. . Satellite Setting SETTINGS . SETUP . Satellite Setting [In Satellite, Antenna & Satellite, Cable & Satellite mode only] You can add/delete/set the satellite you want. . Programme List Update SETTINGS . SETUP . Programme List Update It updates the changed Programme List information by based on country broadcasting circumstance and satellite. It updates the Programme List when the TV turn off all the time. After updates, the Programme List may be changed. If not want, select Off. . For Austria and Germany, this function is supported when Service Operator is not set to None. . Regional Programme SETTINGS . SETUP . Regional Programme [Only Austria] [In Satellite, Antenna & Satellite, Cable & Satellite mode only] Set region broadcasting and watch region broadcasting at a specific time. . To set Service Operater of Satellite, AKTIV must be selected. . To use Manual Tuning SETTINGS . SETUP . Manual Tuning Adjusts programmes manually and saves the results. For digital broadcasting, signal strength and signal quality can be checked. For analogue broadcasting, you can set up station names and use fine tuning (except for Satellite mode). Normally fine tuning is only necessary if reception is poor. . You can also adjust the frequency(KHz) and Bandwidth. . To edit programmes SETTINGS . SETUP . Programme Edi...
Other models in this manual:Televisions - 60PN6506 (4.79 mb)