Manafacture: LG File size: 5.29 mb File name: Language of manual:

Free link for this manual available at the bottom of the page

inst alled on the TV. The contents of this guide are subject to change without prior notice for quality improvement. ..To.view.programme.informationPress.INFO.button. Displays.information.on.current.programme.and/or.current.time,.etc.. ..To.view.programme.informationPress.INFO.button. Displays.information.on.current.programme.and/or.current.time,.etc.. . To set favourite programmes SETTINGS . SETUP . Programme Edit 1 Select the channel you want. 2 Press the FAV button to select Favourite Group and then OK. . You can check your favourite channels by pressing the LIST button on the remote control. . To use Favourite Press the FAV button. You can only view the channels you set as favourites. Press GUIDE button. [In Digital mode only] Obtains information about programmes and airtime. Checks the broadcasting [In Digital mode only] Obtains information about programmes and airtime. Checks the broadcasting time of the desired programme and schedule viewing. . Automatically Setting Up Programme SETTINGS . SETUP . Auto Tuning Automatically tunes the programmes. 1 Select Country where the TV is used. Programme settings change depending on the country you choose. 2 Initiate Auto Tuning. 3 Select Input Source of your choice. 4 Set Auto Tuning following screen instructions. . If Input Source is not connected properly, programme registration may not work. . Auto Tuning only finds programmes that are currently broadcasting. . If Lock System is turned on, a pop-up window will appear asking for password. . Cable DTV Setting option When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as “default”. • Frequency : Enter a user-defined frequency. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). • Network ID : Unique identifier allocated for each user. • Start Frequency : Enter a user-defined start frequency range. • End Frequency : Enter a user-defined end frequency range. . Satellite Setting Option • Satellite : Select your desired Satellite. • LNB Frequency : [Depending on country] Select one value from 9750/10600, 9750/10750, 9750, 10600,10750, 5150, MDU1, MDU2, MDU3, MDU4, MDU5. If you select 9750/10600, 9750/10750(MHz), 22KHz Tone is disabled. If you cannot find the LNB frequency value from the list, select User and manually enter the frequency. • Transponder : Select the transponder you want to tune. • 22KHz Tone : When using 22KHz Tone switch, select A or B. If you use 22KHz Tone, Unicable and Motor Type are disabled. • LNB Power : To enable the power supply for the LNB, select On. If you select Off, Motor Type is disabled. • DiSEqC : When using DiSEqC, select one option from A~D/ToneA~B. If you use DiSEqC, Unicable and Motor Type are disabled. • Unicable Settings : Select On to use Unicable and set the Unicable in the Unicable Setting menu. When Unicable is enabled, 22KHz Tone, DiSEqC, Motor Type are disabled. • Motor Type : Select Motor Type to use Motor and set the Motor in the Motor Setting menu. When Motor is enabled, 22KHz Tone, DiSEqC, Unicable are disabled. . If you set satellite to others, you must add a transponder using Manual Tuning. . When selecting 22KHz Tone and DiSEqc, you must connect them in the same position as displayed on the OSD. . If you delete a Satellite, all programmes stored in the Satellite are deleted. . Motor Setting Option • DiSEqC 1.2 : Control motor to change satellite dish position. Drive Direction : Select the direction in which you want to move the motor. Drive Mode : Two modes are available: Step and Continuous. - Step: The motor moves based on the value you enter (from 1 to 128). - Continuous: The motor moves continuously until you press the Stop. Test TP : Select the test TP you want to tune. Set Limit : Set the motor movement to east or west to have the motor move only within the direction set. -On: You can limit the movement to the current direction by selecting the West/East. -Off: You can cancel the limit you set. Go To Zero: You can move the motor to Zero Store: You can save the motor’s current direction. • USALS : Set your current location(Longitude/Latitude). . Cable DTV Se...

Other models in this manual:
Televisions - 22LN457U (5.29 mb)
Televisions - 26LN450U (5.29 mb)
Televisions - 26LN457U (5.29 mb)
Televisions - 26LN4505 (5.29 mb)

Download now

Please, enter two numbers from picture: