Votes - 3, Average rating: 4 ( )

Manafacture: Sony File size: 3.67 mb File name: Language of manual:

Other manuals for this model:

Televisions - KDL-26P5500 (3.07 mb)

Televisions - KDL-26P5500 (18.35 mb)

Televisions - KDL-26P5500 (18.52 mb)

Televisions - KDL-26P5500 (18.19 mb)

This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again. 3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 27). If you do not change the order in which the analogue channels are stored on the TV, go to next step. 4 When the Eco Preset menu appears on the screen, if you press “Yes,” the “Eco” settings are changed to recommended values to reduce power consumption. 5 Press MENU to exit. The TV has now tuned in all the available channels. Detaching the Table- Top Stand from the TV ~ • Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. KDL-32S55xx/KDL-32P35xx/KDL-26S55xx Table-Top Stand KDL-22S55xx Table-Top Stand Do you want to use the Eco Preset? Choosing "YES" will reduce power consumption. Power Saving Idle TV Standby PC Power Management Reduce 3 h On Yes No Eco Preset 8 GB Safety information Safety information Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation • The TV set should be installed near an easily accessible mains socket. • Place the TV set on a stable, level surface. • Only qualified service personnel should carry out wall installations. • For safety reasons, it is strongly recommended that you use Sony accessories, including: KDL-32S55xx/KDL-32P35xx: – Wall-mount bracket SU-WL500 KDL-26S55xx/KDL-22S55xx: – Wall-mount bracket SU-WL100 • Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. 8 mm-12 mm Screw (supplied with the Wall-mount bracket) Mounting Hook Hook attachment on rear of TV set Transporting • Before transporting the TV set, disconnect all cables. • Two or more people are needed to transport a large TV set. • When transporting the TV set by hand, hold it as shown below. Do not put stress on the LCD panel and the frame around the screen. • When lifting or moving the TV set, hold it firmly from the bottom. • When transporting the TV set, do not subject it to jolts or excessive vibration. • When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. KDL-32S55xx/ KDL-26S55xx/KDL-22S55xx KDL-32P35xx Ventilation • Never cover the ventilation holes or insert anything in the cabinet. • Leave space around the TV set as shown below. • It is strongly recommended that you use a Sony wall- mount bracket in order to provide adequate air- circulation. Installed on the wall 30 cm 10 cm 10 cm 10 cm Leave at least this space around the set. Installed with stand 30 cm 10 cm10 cm 6 cm Leave at least this space around the set. Continued 9 GB • • – Do not lay the TV set flat, install upside down, backwards, or sideways. – Do not place the TV set on a shelf, rug, bed or in a closet. – Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc. – Do not install the TV set as shown below. Air circulation Air circulation is blocked. is blocked. Wall Wall Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries: – Use only mains leads supplied by Sony, not other suppliers. – Insert the plug fully into the mains socket. – Operate the TV set on a 220-240 V AC supply only. – When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables. – Disconnect the mains lead from the mains socket before working on or moving the TV set. – Keep the mains lead away from heat sources. – Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire. Notes • Do not use the supplied mains lead on any other equipment. • Do not pinch, bend, or twist the mains lead excessively. The core conductors may be exposed or broken. • Do not modify the mains lead. • Do not put anything heavy on the mains lead. • Do not pull on the mains lead itself when disconnecting the mains lead. • Do not connect too many appliances to the same mains socket. • Do not use a poor fitting mains socket. Prohibited Usage Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries. Location: Outdoors (in direct sunlight), at the seashore,...

Download now

Please, enter two numbers from picture: